Skip to content
Conference Open access

Thermo-mechanical behaviour and residual stress regulation of 1561 aluminium alloy in ultrasonic impact-assisted wire arc additive manufacturing

Sep 2026 · Journal of Physics, Conference Series · Vol 3313 · 0 citations · 10 references
Physics

Abstract

A combined experimental and finite element study was carried out to investigate the thermo-mechanical behaviour and residual stress regulation of 1561 aluminium alloy during ultrasonic impact-assisted wire arc additive manufacturing (WAAM). Single-pass multi-layer wall specimens were fabricated on an OTC 400 MIG power source and a FANUC robotic platform. Thermal-cycle curves at point P on the substrate were recorded by K-type thermocouples, and longitudinal residual stress distributions along path MN on the deposited surface were measured by X-ray diffraction. The results show that the temperature dependence of the thermophysical properties must be considered in thermal analysis. The simulated thermal-cycle curves at the midpoints of the first, third and fifth deposited layers reveal pronounced non-steady thermal histories and heat accumulation during multi-layer deposition. After ultrasonic impact, the peak longitudinal residual stress decreased from 171.7 MPa to 94.8 MPa, while the central transverse residual stress changed from 7.8 MPa tensile stress to 98 MPa compressive stress. These results demonstrate that ultrasonic impact can effectively improve the near-surface residual stress state of 1561 aluminium alloy WAAM components and provide guidance for process optimisation.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.