Skip to content

A study of supersonic flow past a plate using a two-fluid turbulence model

Nov 2026 · The Physics of Fluids · 0 citations · 39 references

Abstract

This paper presents a numerical study of supersonic flow past a sharp flat plate at zero incidence using a two-fluid turbulence model written in von Mises variables and solved with an implicit marching finite-difference scheme. Velocity, skin-friction, temperature, and turbulent Prandtl number distributions were obtained for M = 2 and M = 5 with adiabatic (Tw/Tr=1) and cooled (Tw/Tr=0.5 and 0.2) walls, Tr being the recovery temperature, in the range Rex≤3⋅107 (Reθ up to about 2 × 104). Laminar-to-turbulent transition was captured by varying the amplitude of the initial disturbance from 0.05% to 5%. The skin-friction coefficient was compared with the van Driest II correlation, with direct numerical simulation (DNS) data at matched Mach number and wall-temperature ratio, and with the recent skin-friction scaling law of Zhao and Fu. For adiabatic walls, the model agrees with van Driest II within 9% (mean deviation 4%–5%) for 4000≤Reθ≤12 000. For cooled walls, the model predicts a skin friction 11%–21% lower than van Driest II. This reproduces the tendency, found in DNS, of van Driest II to over-predict the skin friction on cold walls but overestimates its magnitude: the model under-predicts the DNS skin friction by 3%–26% (14% on average) for 0.15≤Tw/Tr≤0.5. Besides the skin friction, the two-fluid model describes phenomena that are not described by empirical correlations: the dependence of the transition onset on the intensity of the incoming disturbances and the anisotropy of turbulent heat transfer in a compressible boundary layer, which cannot be represented by models based on the Boussinesq hypothesis. The computed turbulent Prandtl number varies strongly in the transition region and tends to a constant value of 0.855 in the turbulent zone.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.