Skip to content
Open access

Mechanically Adaptive, Moisture-Tunable Cellulosic Nanocomposite Fibers and Films

Nov 2026 · Biomacromolecules · 0 citations · 98 references

Abstract

Mechanically adaptive materials inspired by sea cucumber dermis exhibit reversible, water-tunable mechanical properties, yet their use in sustainable fibers remains unexplored. Here, humidity-responsive nanocomposite fibers based on hydroxypropyl cellulose and cellulose nanocrystals were produced by wet spinning into a CaCl2 coagulation bath. The fibers exhibit moisture-induced disintegration, dense packing and moderate CNC alignment, thereby enabling a percolating network. The Young’s modulus increases from 1.3 GPa for neat HPC to 3.6 GPa for nanocomposites containing 60 wt % CNCs, while the strength and strain at break decrease from 36 to 20 MPa and 3.5 to 0.7%, respectively. Under humid conditions, their Young’s modulus and tensile strength decreased to 18 MPa and 0.4 MPa, while their extensibility increased to 36%. Upon drying, the original mechanical properties of fibers and CaCl2-free films are fully restored. The combination of high stiffness and humidity-induced responsiveness expands the potential of mechanically adaptive nanocomposites for water-dispersible products.

Read PDF

Similar papers

Open access Sep 2026

Unlocking the mechanical, physical, and antimicrobial properties of gelatin-based films via chitosan nanoparticle reinforcement for active food packaging applications

The growing ecological concerns over plastic packaging have driven interest in biodegradable film materials. This study evaluates the mechanical, physical, and antimicrobial properties of chicken skin gelatin films reinforced with varying concentrations (0–8%) of chitosan nanoparticles (CNPs). CNPs significantly enhanc...

Najma Farhaten Latiff, M. I. Shaik, Nur Fazlin Sulaiman et al. · 0 citations
Oct 2026

POM-Based Composites with Enhanced Mechanical Strength and UV-Induced Regional Stiffening

Organic–inorganic composites have attracted considerable interest for their ability to combine various properties, yet achieving robust and tunable mechanical properties remains challenging. Herein, we incorporate silicotungstic acid (STA), a polyoxometalate with abundant three-dimensional hydrogen-bonding sites and...

Yu-Lin Chen, Yuan-Ze Meng, Cheng-Long Mu et al. · 0 citations
Open access Oct 2026

Electrospinning of Polyhydroxyalkanoate and Cellulose Acetate Blends to Obtain Elastomeric Fibrous Materials

The development of sustainable elastomeric materials is an important step toward reducing the environmental impact of conventional synthetic rubbers. In this study, elastomeric electrospun materials were fabricated from blends of amorphous polyhydroxyalkanoate (aPHA) and cellulose acetate (CA) at three compositions (...

A. Kramar, M. Grumi, Cristina Prieto et al. · 0 citations
Conference Open access Sep 2026

Performance Analysis of Chitosan Covalently Grafted Basalt Fiber Composites

To improve the inferior interfacial compatibility between basalt fiber and epoxy resin, and enhance the mechanical and insulating properties of composites, silane-pretreated basalt fibers were modified with chitosan solutions of varying concentrations. The effects of modification on fiber and composite performances wer...

Chen-Gao Xiong, He-Chen Liu, Zi-Ying Wang et al. · 0 citations
Oct 2026

Lignin-Densified Conductive Gelatin Hydrogels for Tough and Sensitive Tactile Sensing

Conductive hydrogels with high mechanical robustness and electrical performance are highly desirable for wearable sensing applications; however, simultaneously achieving mechanical reinforcement and reliable conductivity in protein-based hydrogels remains a significant challenge. Herein, a lignin-densified conductive...

Xin-Yi Li, Qiu-Yan Tang, Ying-Chun Xu et al. · 0 citations
Open access Oct 2026

Tunable Mechanical and Biological Performance of Electrospun PLLA Scaffolds via Mesoporous Silica Incorporation and Fiber Architecture Changes

Electrospun scaffolds with tunable mechanical and biological properties are critical for tissue engineering, where materials must match specific cellular environments. We fabricated poly(l-lactide) (PLLA) fibrous scaffolds incorporating 5 wt % SBA-15 mesoporous silica, controlling fiber morphology through solvent sel...

Martyna Polak, M. Gallo, Barbara Onida et al. · 1 citation

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.