Skip to content
Open access

Assessment of wetting phenomena and treatment performance in anaerobic membrane distillation bioreactor (an-MDBR) for pulp and paper industry

Sep 2026 · Water Science & Technology · 0 citations · 59 references

Abstract

Graphical abstract summarizing the An-MDBR treatment concept for pulp and paper wastewater. The image shows wastewater entering an anaerobic CSTR, followed by membrane distillation using a PTFE membrane, producing treated water and biogas. A temperature comparison section presents 35, 45, and 55°C operating conditions with flux, COD removal, fouling, contact angle, and wetting behavior. The graphic highlights 45°C as the optimal condition and shows membrane characterization methods including FTIR, Raman, XRD, and contact angle analysis. This study investigates the performance of a lab-scale anaerobic membrane distillation bioreactor (An-MDBR) for treating synthetic pulp and paper (P&P) wastewater under mesophilic (35–45 °C) and thermophilic (55 °C) conditions. The An-MDBR integrates an anaerobic continuous stirred tank reactor (CSTR) with a submerged membrane distillation (MD) module in a side-stream configuration. Wastewater with chemical oxygen demand (COD) of 1,300 ± 130 mg/L was treated to evaluate COD removal, biogas production, membrane fouling, and operational stability. Daily COD removal of 23.1 g/day (76–84% from CSTR) was observed at a flow rate of 21.6 mL/day, yielding specific methane (CH4) production of 0.89–1.42 mL CH4/g COD removed. Optimal performance occurred at 45 °C, balancing flux stability (17 LMH), high organic removal, and methane-rich biogas (50.5% CH4; 1.2 ± 0.1 mL CH4/g COD). Biomass parameters (VFA/alkalinity <0.5; mixed liquor volatile suspended solid/mixed liquor suspended solid >0.7) indicated stable microbial activity, with near-complete removal of PO43−, >90% SO42−, and approximately 40% total Kjeldahl nitrogen (TKN). Membrane fouling, dominated by organic deposition and high temperature-induced inorganic scaling confirmed by Fourier Transform Infrared Spectroscopy, Raman, and X-ray diffraction analyses, caused progressive hydrophobicity loss, with contact angle decreasing from 111.6° (pristine) to 10.3° at 55 °C, leading to irreversible pore wetting and operational instability at thermophilic conditions.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.