Skip to content
Open access

Dual-Bias Optimization of the Analog Front-End and the Pinned Depleted Diode in the CPV-4 Sensor

Oct 2026 · IEEE Transactions on Nuclear Science · Vol 73, pp. 4038-4044 · 0 citations · 12 references

Abstract

Future electron–positron colliders require vertex detectors with high spatial resolution, low noise, and stringent power constraints. The compact pixel for vertex (CPV-4) prototype combines a pinned depleted diode (PDD) sensor with a silicon-on-insulator (SOI) analog front-end, whose performance is jointly determined by sensor bias and circuit operating conditions. This work presents a systematic experimental study of this bias dependence through a dual-bias optimization framework. The buried p-well (BPW) bias and front-end bias parameters are jointly tuned to investigate the balance between PDD capacitance reduction and back-gate-induced threshold shifts. Front-end-only pixels are used to characterize the circuit response; PDD-integrated pixels are used to evaluate sensor-front-end coupling; and near-infrared laser measurements are used to validate the response to sensor-generated signals. The results show that a sufficiently negative BPW bias is essential for stable operation of PDD-integrated pixels. Under optimized conditions, the gain of PDD-integrated pixels increases by approximately a factor of 4, while the equivalent noise charge (ENC) decreases by more than a factor of 2. Near-infrared laser measurements confirm sensor-generated signal detection at the operating point selected by the electrical bias scans, supporting the proposed optimization approach.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.