Field Implementation and Optimization of Nitrogen-Based H2S Stripping for Deep Aquifer Water Utilization in Hydraulic Fracturing
Abstract
Water scarcity in the Middle East is a well-known challenge. As operators aim to explore and develop the region's vast unconventional resources, the need to identify alternative water sources to meet fracturing demand has become increasingly critical. Surface water is not available, and shallow aquifers contain water of sufficient quality for human consumption. Therefore, attention is directed toward deep aquifer water, which is generally unsuitable for purposes other than industrial use. These sources typically contain high salinity, elevated TDS, and H2S. No previous documented experience was found regarding the management of this type of water for hydraulic fracturing operations. Among the challenges associated with handling this water, H2S management represents the primary concern. Several treatment options are available; however, this paper focuses on H2S stripping and the evaluation of key parameters to improve the process, with the objective of reducing chemical treatment requirements and enabling safe surface storage prior to fracturing operations. Using nitrogen for H2S stripping in column systems, several procedures were developed and subsequently refined through operational lessons learned. From measurement techniques to the implementation of a field-based sensitivity and optimization methodology, a comprehensive approach was developed and applied. This methodology was also required to complement the practical limitations of commercially available engineering calculation tools. The treated water was safely stored and successfully used in fracturing operations. The optimized methods enabled sustainable flow rates sufficient to supply continuous fracturing demand, demonstrating that H2S stripping is a viable solution for producing deep aquifer water suitable for fracturing applications. Measurement techniques for H2S in water and their field applicability were extensively evaluated and tested, establishing a new benchmark for this type of operation. A set of field-derived equations was developed to provide additional insight into stripping efficiency. Parametrization of stripping column operation and practical lessons learned are presented, highlighting best practices to achieve maximum performance.