Renewable energy-driven desalination technologies: Energy performance, renewable coupling and sustainability challenges
Abstract
Energy demand governs the cost and the carbon footprint of desalination, and coupling with renewable sources is the main route to lower both. This narrative review compares seawater and brackish-water reverse osmosis (SWRO, BWRO), electrodialysis (ED), multi-effect distillation (MED), multi-stage flash (MSF), forward osmosis (FO) and humidification–dehumidification (HDH) on one harmonised basis, in which heat is converted into electrical equivalent. Large SWRO plants use 3–4 kWh/m³, about three times the thermodynamic minimum of 1.05 kWh/m³ calculated here for 35 g/L at 50 % recovery, whereas MED and MSF require 6.5–25.5 kWh/m³ in electrical equivalent. Published photovoltaic and wind RO units mostly report 1.1–7.3 kWh/m³, with two outlying entries of 19–26 kWh/m³ for units of 5.7 m³/day. With gas-fired grid electricity SWRO emits about 1.8 kg CO 2 e/m³, against 0.04–0.17 kg/m³ with wind or photovoltaic electricity, while dedicated gas-fired heat brings MED and MSF to about 20 kg/m³. Recent Moroccan projects and simple sizing relations are used to propose a selection guide for coastal and inland North African conditions.