Development and Validation of a Simulation Framework for Acoustic Intensity Measurements Using Dual-Microphone Probes Under Moving Source and Probe Conditions
Sep 2026· Italian National Conference on Sensors· Vol 26, pp. 6233· 0 citations· 27 references
Medicine
Abstract
Highlights What are the main findings? An acoustic propagation simulation framework for acoustic intensity measurement using dual-microphone probes under arbitrary source and probe motion has been developed. The simulator incorporates retarded-time computation, trajectory and signal interpolation, and Doppler-related effects within a unified framework showing excellent agreement with theoretical predictions derived from acoustic propagation theory. What are the implications of the main findings? The proposed simulator provides a flexible and cost-effective platform for designing, verifying the consistency, and optimizing acoustic intensity measurement systems before conducting experimental campaigns. The developed framework enables the systematic evaluation of factors such as probe motion, orientation, and signal-processing algorithms, supporting future advances in sound-power determination and source-localization techniques. Abstract This work presents a comprehensive physics-based simulation framework designed to model and assess the performance of acoustic intensity dual-microphone probes under dynamic conditions. The measured quantity, acoustic intensity, is a vector representing the net flow of sound energy through a unit area, allowing for the estimation not only of the amount of energy transmitted but also its direction. This characteristic is of great interest for locating sound sources and evaluating the acoustic power radiated by a source enclosed within a bounding surface. To analyze the quality of the intensity determination, an acoustic propagation model was developed in a MATLAB R2025a environment that allows for the simulation of the generation, three-dimensional propagation, and measurement of sound signals under free-field conditions. The model incorporates moving sources and sensors, precise calculation of propagation delays, and simulation of triaxial probes, also allowing for sensor translations and rotations. From the simulated pressure signals, intensity estimates are obtained using time and frequency-domain methods, and the quality of the estimates is evaluated using error metrics against known geometric references. The results demonstrate the simulator’s ability to generate coherent and controlled datasets and highlight its usefulness as a tool for comparative analysis of intensity estimation methods and for predicting the performance of real probes in dynamic scenarios.
Noise directivity testing is used to characterize the radiation strength of noise from a sound source in different spatial directions. It is supported by national standards. Conventional testing is not applicable to moving sound source scenarios, in which relative motion exists between the sound source and sensors; the...
Yu-Qing Li· Theoretical and Natural Scie...· 0 citations
Acoustic Emission (AE) is widely used in Non-Destructive Evaluation (NDE) to monitor materials and structures and to detect early-stage damage by recording transient elastic waves generated by localised energy releases. Deeper analysis to establish a reliable link between AE signatures and specific damage mechanisms re...
Van-Duong Le, Luis Espinosa, Marianne Perrin et al.· e-Journal of Nondestructive...· 0 citations
A reliable numerical reproduction of acoustic emission (AE) tests requires a clear understanding of simulating the AE process. Here, we perform a comparative study of Pencil-Lead Break (PLB) tests on polymethyl methacrylate (PMMA) plates using two-dimensional (2D) and three-dimensional (3D) finite element models, with...
Xi Chen, Nathalie Godin, A. Doitrand et al.· e-Journal of Nondestructive...· 0 citations
This paper reports experimental results of a practical workflow for selecting numerical parameters of a time-domain acoustic wave propagation model under joint accuracy and computational feasibility constraints. In applied verification and validation tasks, the credibility of conclusions depends not only on physical mo...
O. Heiko, I. Varava, A. Vdovyna· Інфокомунікаційні та комп'ют...· 0 citations
Early reflections in spatial room impulse responses (SRIRs) measured using spherical microphone arrays (SMAs) play an important role in spatial audio analysis, rendering, and reverberation modeling. Their accurate localization and characterization can facilitate the analysis, processing, and manipulation of measured re...
Pierre Massé, Anthony Gallien, W. Kreuzer et al.· 0 citations
Acoustic Emission (AE) is a highly sensitive technique for detecting the initiation and evolution of damage in materials, widely used in structural diagnosis and health monitoring. However, its sensitivity results in large datasets, making it essential to distinguish damage-related signals from environmental noise and...
V. Buljak, A. Cornaggia· e-Journal of Nondestructive...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.