IoT-Based Industrial Worker Safety Monitoring System Using Wi‑Fi Zone Detection, Wearable Health Monitoring, and Fall Detection
Abstract
Much of a plant floor, and every basement or tunnel, has no GPS fix, and one supervisor cannot watch every worker at once. We describe a wearable Internet of Things (IoT) prototype for these places. One small node estimates the worker’s zone from the signal strength of nearby Wi-Fi access points, reads heart rate and blood-oxygen saturation with an optical sensor, and checks an inertial sensor for possible falls. A supervisor follows it all on a live control-room dashboard. The node is built on a Seeed Studio XIAO ESP32-S3 and posts readings to a Node.js/Express backend, which forwards events to a React dashboard through Socket.IO. Zones are derived from the received signal strength indicator (RSSI) of registered access points, and falls are flagged when a high acceleration magnitude is followed by inactivity. The paper also reviews related work on wearable industrial safety, RSSI localization and threshold-based fall detection, writes the zone and fall rules down formally, and sets out a repeatable protocol for measuring zone accuracy, fall precision and recall, sensor agreement, delivery rate and alert latency. The dashboard is implemented, and screenshots taken with simulated workers are included. No measured results are given here; they will follow once the protocol has been run. This is a research prototype, not a certified industrial safety product or a clinically validated medical device.