This paper presents a dual-quadrotor hook- suspended transport system for cooperative aerial manipulation of a payload that is not rigidly attached to a fixed point along the cable. Two quadrotors are connected by a single inextensible cable that passes through a frictionless hook mounted on the payload, allowing the cable to slide between its two segments. This introduces a cable-distribution variable that couples the quadrotor motion, cable geometry, and payload dynamics. A feasible reference-generation framework is formulated using the desired payload pose, cable distribution, and system shape while satisfying the cable-length constraint and elliptical workspace. The quadrotors track the geometrically generated trajectories while maintaining positive cable tension and respecting actuator limits. The payload pose is estimated from the system geometry, and its measured position is used only to validate the desired trajectory. The approach is evaluated through experimental demonstrations.
Quadrotors with cable-suspended payloads have received more attention among researchers in the aerial transportation, delivery, infrastructure inspection, emergency response, precision agriculture, and operations in hazardous environment applications. Cable suspension provides mechanical separation between the vehicle...
R. Jayakumar, Anoop Sasidharan, R. K. Velamati· Drones· 0 citations
Cooperative payload transportation using multiple Uncrewed Aerial Vehicles (UAVs) poses challenges in stability, coordination, and robustness, especially under external disturbances and unmodeled dynamics. This work proposes a dual-UAV payload transportation framework supported by a compact, custom-designed force senso...
Andrea Delbene, G. Cannata, Giorgio Carlini et al.· IEEE Robotics and Automation...· 0 citations
Unmanned Aerial Vehicles (UAVs) have the potential to perform different tasks, including aerial delivery. However, the payload transportation using a single aerial vehicle is limited to the UAV maximum takeoff weight. On the other hand, the use of multiple UAVs in flight formation can increase the system capability to...
Renan Silva, R. B. Santos, R. Geronel et al.· IEEE Access· 0 citations
This paper presents a control method for a cable-suspended aerial manipulator performing high-altitude contact tasks. The target tasks include polishing and wiping on planar and curved surfaces, in which the end-effector must maintain a desired contact force while the suspended aerial manipulator remains stable against...
Wooyong Park, Byeonggi Yu, Jinwon Kim et al.· Journal of the Korean Societ...· 0 citations
An adaptive hybrid control method combining relay (Bang-Bang) speed control at large suspension deflection angles and optimal linear-quadratic regulation (LQR) at small angles is synthesized and provides effective oscillation damping and dynamic cohesion, making it suitable for urban logistics, port infrastructure oper...
D. Kucherov, Maryna S. Graf· Electronics and Control Syst...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.