Skip to content

Numerical Modeling, Validation, and Emission Characterization of Ammonia-Diesel Dual-Fuel Combustion Engines

Sep 2026 · ASME 2026 DRIVN Global Transportation and Power Systems Summit · 0 citations

Abstract

Ammonia (NH3) has emerged as a promising energy carrier for marine engine applications. However, its low laminar flame speed and high ignition energy create challenges for efficient combustion in engines. Dual-fuel strategies combining ammonia with diesel have shown promise in addressing these limitations, yet the underlying mechanisms related to the impacts of blending hydrogen in NH3-diesel combustion and the governing combustion and emission formation mechanisms at high ammonia utilization ratios remain insufficiently understood. This work addresses these gaps through the development and validation of a detailed multi-engine computational fluid dynamics (CFD) model for dual-fuel NH3-diesel engine operation with hydrogen blending. First, the CFD engine model integrates a coupled ammonia (Zhang) and multi-component diesel surrogate (Ren–Kokjohn) reaction mechanism with a detailed chemistry solver to predict combustion and pollutant formation. The model is validated against experimental results of heat-release and in-cylinder pressure for a single-cylinder ∼0.5L research engine at 6 and 10 bar indicated mean effective pressure (IMEP) with premixed aqueous NH3 (29.1% NH3 by mass) and H2 additions up to 20% (by energy). Next, the high-fidelity CFD model is transferred and further validated to capture combustion and emission characteristics on a 1.1L single-cylinder Cummins ISB engine for 90 and 95% NH3 utilization (by energy) at 12 bar IMEP with a single diesel injection strategy, demonstrating multi-scale engine model validity. The integrated CFD model provides mechanistic insights into NH3 ignition mechanisms, hydrogen-preignition, and pathways for unburnt NH3 and N2O formation at different engine loads and ammonia/hydrogen/diesel energy fractions. The aq. NH3-H2-diesel combustion engine simulation results indicate that 20% hydrogen premixed energy fraction (PEF) could reduce N2O emissions by 74% while achieving near-zero unburnt NH3 emissions relative to non-hydrogen blending cases. However, H2 preignition can occur even at small hydrogen PEFs of 7%. Finally, validated simulation results for both the ∼0.5 L and 1.1 L engines indicate that N2O formation and unburnt NH3 can persist late into the expansion cycle across various NH3 utilization ratios and are dominant in diesel-deprived areas and near-wall or crevice regions due to high thermal stratification.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.