Oct 2026· APL Materials· Vol 14· 1 citation· 50 references
Abstract
Titanium nitride thin films are prepared using DC reactive magnetron sputtering at room temperature, with an RF bias applied to the substrate to systematically control film growth. By adjusting the substrate RF bias, the degree and length scale of disorder are tuned, leading to pronounced changes in film microstructure and superconducting properties. A dome-shaped dependence of the superconducting critical temperature, Tc, on RF bias is observed, accompanied by a minimum in the superconducting coherence length near the peak of the Tc dome. This correlated behavior reflects a controlled evolution from point-like disorder to a nanocrystalline microstructure that ultimately develops into well-ordered grains separated by electrically transparent grain boundaries. At intermediate RF bias, the films acquire an optimal grain size that enhances intragrain superconductivity while reducing the effective coherence length. This mesoscopic control of disorder and microstructure provides a pathway for engineering TiN films with superconducting properties that are desirable for applications requiring high normal-state sheet resistance in fully gapped superconductors, such as superconducting resonators and high-kinetic-inductance devices.
We investigate the structural and electronic transport properties of zirconium nitride (ZrN) thin films grown by dc ion-beam assisted sputtering (IBAS) as a function of nitrogen partial pressure, sputtering power and deposition temperature. Variation of growth conditions enables controlled tuning from disordered metall...
M. DiPreta, Samuel C. Jiang, S. Kruhlov et al.· 0 citations
Titanium nitride (TiN) is a promising superconducting material for scalable quantum technologies owing to its tunable kinetic inductance and compatibility with CMOS thin-film processing. However, the superconducting performance of atomic-layer-deposited TiN can be degraded by oxygen incorporation, off-stoichiometry, an...
Z. Sadirkhanov, A. Tuigynbek, M. Surendran et al.· 0 citations
This study examines the effect of ion modification in forming gas (H2/N2) plasma on the evolution of the properties of thin epitaxial niobium nitride (NbN) films. The films were grown on C-cut sapphire substrates using plasma enhanced atomic layer deposition. The ion modification process was carried out in a reactor eq...
M. Shibalov, A. A. Shibalova, A. Mumlyakov et al.· Superconductors Science and...· 0 citations
Superconducting diode effects are characterized by direction-dependent critical currents in the superconducting state. Here, we investigate diode-like transport in 128-nm-thick Mo thin film deposited on Si_SiO2 substrate by DC magnetron sputtering. The thin film exhibit a superconducting transition temperature TC of 5....
Akhilesh Kumar, Shivani Soni, G. Natarajan et al.· 0 citations
TiN thin films were deposited on muscovite mica substrates over a wide range of growth temperatures (25–400 °C) to investigate the influence of substrate-mediated microstructure on electronic transport. X-ray diffraction confirms crystalline TiN formation across the growth series, while scanning electron microscopy rev...
Gitanjali Mishra, Maya Young, A. Tiwari· Journal of Applied Physics· 0 citations
The development of large, high-quality flexible high-temperature superconducting films is a crucial focus in flexible electronics research, posing challenges and offering promising applications. Among candidate materials, YBCO is a high-performance high-temperature superconductor. However, the mechanical behavior and s...