Wide-bandgap perovskites (1.6-1.8 eV) are promising top sub-cells for tandem and indoor photovoltaics, but high bromine content induces halide segregation and accelerated degradation. In this work, we systematically investigate three bulk modifiers: Ti3C2Tx (2D flakes), Methylammonium chloride (crystallization additive), and the self-assembled monolayer 4-(pyridin-4-yl)triphenylamine in CsFAPb(I-Br)3 (1.72 eV) p-i-n solar cells. Notably, Ti3C2Tx modified devices deliver a champion power conversion efficiency of 18.84 % for 1.72 eV wide-bandgap perovskites, maximizing efficiency through optimized energy-level alignment and reduced series resistance.
To address operational stability, we identified two distinct ion-migration-driven degradation pathways. Local ion interactions at the hole-transport interface causes void formation and photocurrent loss, which is effectively suppressed by methylammonium chloride. In contrast, ion accumulation at extraction interfaces primarily degrades the fill factor. By immobilizing mobile ions, the 4-(pyridin-4-yl)triphenylamine self-assembling monolayer prevents void formation, improves fill factor thermal resilience, and achieves an 80 % operational lifetime of over 800 hours under continuous stress (ISOS-L-2, 65 °C). These findings demonstrate that managing ionic dynamics and passivating traps are complementary strategies for stabilizing wide-bandgap perovskite solar cells.
Wide‐bandgap (WBG) perovskites with a ∼1.78 eV bandgap are essential for monolithic all‐perovskite tandem cells, yet their efficiency and stability are limited by complex precursor chemistry, uncontrolled crystallization, defect formation, and photoinduced halide segregation. Here, we report 4‐(3‐Carbamimidoylguanidino...
Kai-Xin Huang, Xian-Yong Zhou, Yin-Tai Xu et al.· Advances in Materials· 0 citations
Ultra-wide-bandgap (UWBG) perovskite solar cells are critical for constructing high-efficiency multi-junction tandem devices, yet their performance is constrained by severe nonradiative recombination and disorder in phase growth arising from high bromine content. Here, we report a rational anion-cation pairing strategy...
Lang Xu, Tai-Feng Li, Si-Min Ma et al.· ChemSusChem· 0 citations
Wide-bandgap mixed-halide perovskites are attractive top-cell absorbers for tandem photovoltaics owing to their high-voltage potential and complementary spectral response. However, ionic defects generated during solution processing promote nonradiative recombination, ion migration, etc. Here, NdCl3 is introduced into C...
Compositional engineering offers a direct route to tuning the absorber band structure and interfacial energy alignment in perovskite solar cells (PSCs). We systematically varied the formamidinium (FA)/methylammonium (MA) and I/Br ratios in Cs0.05(FAxMA1-x)0.95Pb(IxBr1-x)3 perovskites to examine how composition governs...
Yu-Na Lee, Kyung-Min Han, Yun-Kyeong Hong et al.· ACS Applied Materials and In...· 0 citations
The power conversion efficiency (PCE) and long‐term stability of polycrystalline perovskite solar cells (PSCs) are fundamentally limited by bulk non‐radiative recombination and mismatched interfacial energy levels. To address these bottlenecks, we introduced 4,4’‐(2,1,3‐benzothiadiazole‐4,7‐diyl)dibenzoic acid (BTB...
Widebandgap (WBG) perovskites are critical for highefficiency tandem solar cells but suffer from rapid crystallization, photoinduced halide segregation, and interfacial losses. We introduce methyl 2(4,4,5,5tetramethyl1,3,2dioxaborolan2yl)1Hindole7carboxylate (MHIC) as a multifunctional modulator for 1.68 eV WBG per...