Comparative Assessment of Fuel Efficiency of Power Plants of Shunting Diesel Locomotives Under Operating Cycle Conditions
Abstract
Purpose. The purpose of the article is to study the fuel efficiency of power plants of a shunting locomotive under operating cycle conditions. Methodology. An analysis of the parameters of the operating modes of the power plants of shunting diesel locomotives was carried out. It was determined that for shunting operations, the power of the diesel engine, which does not exceed 500 kW, is sufficient. For the analysis, data on the conditional operating cycle when performing shunting operations for one hour were used, which reflect the time dependence of the driver's positions being turned on. The fuel consumption of the following types of diesel locomotive power units has been examined and determined: 1) the standard power unit of the ChME3 diesel locomotive; 2) a power unit with a single Caterpillar C32 diesel engine rated at 950 kW; 3) a twin-diesel power plant with two Cummins QSM15 diesel engines, each with a power output of 500 kW; 4) a hybrid power plant comprising a Cummins QSM15 diesel engine and an energy storage system. For train operation, an estimate of the specific fuel consumption for the above-mentioned power plant options was made. Findings. It was determined that during shunting operation in a conditional hourly cycle, the fuel consumption of the ChME3 serial diesel locomotive is 39.7 kg. When operating in the same cycle of the power plant with a Caterpillar C32 diesel engine, the fuel consumption is 28.4 kg. The fuel consumption of the power plant with a Cummins QSM15 diesel engine is 25.9 kg (only one diesel engine is operating). The fuel consumption for charging the accumulator is 28.8 kg. The results obtained indicate a significant reduction in fuel consumption when using modern diesel engines, and the use of a diesel engine of reduced power ensures minimal fuel consumption. When performing train work, the lowest specific fuel consumption is achieved in a two-diesel power plant with a capacity of 160…900 kW. Originality. The feasibility of using a two-diesel power plant on shunting locomotives has been substantiated. Practical value. The results obtained can be used in the creation of power plants for shunting locomotives and other autonomous rolling stock.