Skip to content
Open access

Optimized Hermite Interpolation for Geometrically and Aerodynamically Consistent Airfoil Reconstruction in Computational Fluid Dynamics

Oct 2026 · Symmetry · Vol 18, pp. 1758 · 1 citation

Abstract

Airfoil profiles form the foundation of flight performance by determining the balance between lift and drag forces. Computational Fluid Dynamics (CFD) analyses enable a detailed examination of the velocity and pressure distributions around these profiles. Interpolation methods enhance the accuracy of simulations by allowing for the precise definition of wing geometry. These methods make it possible to compare different profile types and achieve an optimal aerodynamic design. Accurate geometric representation of airfoil profiles is critically important for achieving reliable aerodynamic predictions in computational fluid dynamics, particularly under low-Reynolds-number flow conditions where pressure-gradient sensitivity and flow separation behavior become highly geometry-dependent. In this study, the aerodynamic behavior of Clark Y, Eppler 205, FX 63-137, NACA series, RAE 2822, and S1223 airfoil sections under low-Reynolds-number (Re≈1×105) conditions was investigated using CFD analyses. It was observed that the leading-edge suction peak became more pronounced in all profiles with increasing angle of attack, while the lift and drag responses exhibited airfoil-dependent variations across the investigated angles of attack. Differences in the lift and drag responses became more pronounced among the investigated profiles at the higher evaluated angles of attack, reflecting their different geometric and aerodynamic characteristics. Hermite interpolation-based geometric modeling, which forms the basis of this study, improved geometric continuity and reduced interpolation-induced surface irregularities, thereby providing a more consistent geometric representation for the subsequent CFD analyses. It should be emphasized that geometric or numerical stability alone does not establish physical aerodynamic accuracy, which requires independent validation against appropriate reference or experimental data. The results indicate the variations in pressure distributions and aerodynamic coefficients across the examined angles of attack, depending on the airfoil profile, specifically, suction performance becomes more pronounced as the angle of attack increases, while lift and drag characteristics vary among the profiles studied, establishing optimized Hermite airfoil profiles as a basis for CFD aerodynamic evaluation under low-Reynolds-number conditions.

Read PDF

Similar papers

Open access Oct 2026

The Influence of Airfoil Geometric Parameters on Lift Generation Mechanisms: An Analysis Based on Aerodynamic Principles

Through geometric optimization, airfoil designs directly affect efficiency, stability, and energy performance in aerospace and wind systems. More specifically, airfoil geometry optimization improves aerodynamic efficiency and reduces energy losses in aircraft and wind turbines, thus supporting technological innovation...

Yu-He Yang · 0 citations
Open access Sep 2026

Rapid Aerodynamic Optimization of Aerospace Structures: Engine Nacelles

The geometric definition of the engine nacelle plays a pivotal role in determining the aerodynamic efficiency of different propulsion systems as it controls the capture area, mass flow rate and external drag. The primary objective of this paper is to provide design optimization for nacelles with reduced mathematical co...

Ashray Saxena · 0 citations

Unsteady Aerodynamic Modeling for Coflow Jet Airfoils

This study develops an improved state-space model for coflow jet (CFJ) airfoils by incorporating the jet momentum coefficient into the internal state-variable equation. The key contributions are summarized as follows. First, to quantitatively characterize flow separation characteristics of CFJ airfoils, steady and...

Y. Zhao, Bai-Gang Mi, Xuan Bai · 0 citations
Oct 2026

Dominant geometric sensitivities and associated aerodynamic mechanisms of a co-flow jet airfoil

Co-flow jet (CFJ) is an active flow-control technique with strong potential for lift enhancement, drag reduction, and separation suppression. However, the relative importance, influence directions, and aerodynamic mechanisms associated with CFJ geometric parameters remain insufficiently understood. In this study, Krigi...

Shijiexi Gao, Zi-Shuai Sheng, Xin Ouyang et al. · 0 citations
Conference Open access Sep 2026

Numerical investigation on aerodynamic load characteristics of an aircraft-mounted radome under rotor interference

To ensure the structural reliability of the external radome mounted above the helicopter main rotor, high-fidelity Computational Fluid Dynamics (CFD) simulations were conducted to investigate the complex aerodynamic loads encountered during actual flight. Addressing the structural design requirements, this study employ...

Xi-Wei Zhou, Lian-Wang Fei · 0 citations
2026

Comparative CFD Analysis of SST k–ω and Spalart–Allmaras Turbulence Models for Aerodynamic Force Prediction of a Grid-Fin Missile at Mach 2.5 and 10° Angle of Attack

The aerodynamic performance of aerospace vehicles operating in supersonic flow regimes is significantly influenced by the accurate prediction of complex flow phenomena, flow separation and turbulent boundary-layer interactions. The present study investigates the aerodynamic characteristics of the selected configuration...

Prashant, R. G, M. R. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.