Skip to content
Conference Open access

Optimization of Coagulation–Flocculation Conditions for Surimi Processing Wastewater Treatment Using Response Surface Methodology

Oct 2026 · IOP Conference Series: Earth and Environment · Vol 1674 · 0 citations · 24 references
Physics

Abstract

Surimi processing wastewater is a high-strength industrial effluent rich in suspended proteins, emulsified lipids, and organic matter, presenting severe challenges for conventional treatment. This study optimized a composite physicochemical pretreatment using a cationic modified polyaluminum chloride formulation (CPEHF) coupled with polyacrylamide (PAM) flocculants. Raw wastewater monitoring revealed high matrix variability: chemical oxygen demand (COD) of 2,577-4,521 mg/L, total suspended solids (TSS) of 666-1,270 mg/L, and fat, oil, and grease (FOG) of 455-1,041 mg/L. Comparative jar testing evaluated conventional polyaluminum chloride (PAC) and CPEHF paired with non-ionic hyper-PAM (PAM-A), anionic PAM (PAM-B), and cationic PAM (PAM-C). The CPEHF/PAM-B combination demonstrated clear superiority, removing 52-72% of turbidity and 75-81% of TSS. Consequently, a three-variable Box-Behnken design under Response Surface Methodology mapped the interactions of pH (6-8), CPEHF dosage (25-75 mg/L), and PAM-B concentration (1-3 mg/L). ANOVA validated the derived quadratic models (R2 = 0.9681-0.9731, p < 0.001), identifying pH as the critical parameter. Multi-objective optimization established global optimal conditions at pH 7.0, 75 ppm CPEHF, and 2.64 ppm PAM-B, yielding removal efficiencies of 78.98% turbidity, 87.14% TSS, and 89.92% COD via synergistic charge neutralization and polymer bridging.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.