Optimization of Medium Conditions for Removal of Vat Green 1 by Bentonite Using Response Surface Methodology
Abstract
In this study, the removal conditions of Vat Brilliant Green FFB (C.I. Vat Green 1, VG1) dye were optimized using a two-stage experimental design. The Plackett–Burman Design program was used to eliminate independent parameters such as contact time (min), initial concentration (mg/L), adsorbent dose (g), temperature (°C), pH and shaking speed (rpm). This method was also used to measure the effects of independent parameters on the response. As a result of the PBD, initial concentration, adsorbent dose, contact time, and pH were selected as the most effective parameters in dye removal. A central composite design was applied to determine the maximum response values and effective parameters. As a result of the obtained linear model and equations, a maximum removal rate of 65% was achieved; this indicates that VG1 is difficult to remove in aqueous solutions. In this study, the highest experimentally observed removal efficiency was observed at an initial concentration of 1100 mg/L, a contact time of 27.5 minutes, an adsorbent dose of 1.0 g, and a pH of 7. While this study demonstrates the recalcitrant nature of VG1 dye within statistical boundaries, the developed optimization model provides a practical, cost-effective, and a preliminary statistical framework for designing industrial wastewater treatment plants and optimizing operational conditions.