Skip to content
Preprint

Cross-Layer Co-Design of Low-Latency Stateful Logic Adders with Printed Memristors

Oct 2026 · 0 citations · 26 references
Computer Science

TL;DR

This work experimentally demonstrates a mixed MAGIC and FELIX logic primitive set on printed Electrochemical Metallization (ECM) memristors and derives a full adder sequence optimized for inter-bit carry propagation and shows how cross-layer co-design can translate into improved workload-level performance.

Abstract

Data movement between memory and processing units remains a major bottleneck in data-centric systems. Memristive Stateful Logic (SL) addresses this problem by performing Boolean operations directly on stored resistive states. However, arithmetic efficiency depends jointly on the device-supported logic primitive set, the dependency structure of the resulting operation sequence, and its mapping to datapath architectures. While prior designs typically optimize device, logic, and architecture layers separately, we jointly consider them to co-design a stateful adder. We experimentally demonstrate a mixed MAGIC and FELIX logic primitive set on printed Electrochemical Metallization (ECM) memristors and derive a full adder sequence optimized for inter-bit carry propagation. Mapping this sequence to bit-serial, bit-parallel, and bit-pipelined datapaths reduces the latter two to 2n+6 cycles for an n-bit addition. For 32-bit addition, this requires 60-88% fewer cycles than prior SL adders. Across four representative workloads, we achieve 3.7x-16.4x speedup over prior. These results show how cross-layer co-design can translate into improved workload-level performance.

View source

Similar papers

Open access Oct 2026

Ultra-Efficient Memristive Voltage-Resistance Logic Framework With Integrated Readout Strategy Based on Hafnium Zirconium Oxide.

The integration of logic operations and data storage is regarded as a promising strategy for enabling edge computing, a key requirement for real-time, data-intensive scientific and industrial applications. Achieving edge-capable computing, however, requires exceptional spatiotemporal efficiency, and many previously pro...

W. Kho, Hyun-Deog Hwang, Hyunju Kim et al. · 0 citations
Oct 2026

Unified Single-Transistor Cell for Multimode Reconfigurable Logic and Ternary In-Memory Search.

The rapid growth of data-intensive applications demands efficient data processing with reduced data movement. Logic-in-memory (LIM) and in-memory search, exemplified by ternary content-addressable memory (TCAM), offer promising solutions; however, their typical implementation in separate device modules leads to increas...

Jiahui Lyu, Ji Hwan Lee, Jing-Jie Niu et al. · 0 citations
Review Open access Oct 2026

Memristive In-Memory Computing for AI: Neural Network Acceleration, Adaptive Learning, and System Integration

Moving data between memory and processing units has become a major cost in neural network computing. Memristive crossbars address this cost by retaining model parameters as conductance states and performing parallel multiplication and accumulation within the array. This review examines how that physical operation is tr...

Chao-Yang Dong, Xuan Xie, Jian-Jun Chen et al. · 0 citations
Open access Sep 2026

In-Memory Computing Enabled by 32 × 8 1T1R Memristive Crossbar Arrays

The exciting potential of memristor-based components of neuroelectronics as the building blocks for a new era of artificial intelligence hardware, capable of surpassing current computational limitations, as well as their role in the ongoing transition to hybrid intelligence based on the symbiosis of electronic and biol...

A. Mikhaylov, S. Shchanikov, M. Koryazhkina et al. · 0 citations
Open access Oct 2026

Low-Power Cascadable STMG Full-Adder Architecture Without Carry Regeneration

This paper presents a design-optimization technique for cascadable spin-torque majority gate (C-STMG) that eliminates the need for carry regeneration, which has been a key limiting factor in conventional C-STMG-based arithmetic circuits. In conventional C-STMG adders, a carry-regeneration block was required to access t...

Gyumin Noh, Yeongkyo Seo · 0 citations
Sep 2026

Evaluation of Power-Clock Waveforms for Positive Feedback Adiabatic Logic in 16 nm FinFET Technology

Adiabatic logic can recover part of the energy stored on load capacitances through quasi-reversible switching, but its waveform-optimized operation in FinFET technology and at multi-GHz frequencies remains underexplored. This work investigates Positive Feedback Adiabatic Logic (PFAL) in the TSMC 16 nm FinFET process. A...

M. Pyrzowski, Franciszek Łukowski, A. Todri-Sanial · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.