Skip to content
Open access

Influence of Europium Doping on the Electrical Properties of Ba0.9Ca0.1TiO3 Ceramics

Oct 2026 · Materials · Vol 19, pp. 4394 · 0 citations · 94 references
Medicine

Abstract

Eu-doped Ba0.9Ca0.1TiO3 (BCT10) ceramics with the nominal composition (Ba0.9−xEuxCa0.1)TiO3, where x = 0–0.025, were prepared by the conventional solid-state reaction method. X-ray diffraction analysis and Rietveld refinement revealed a predominantly tetragonal perovskite structure (space group P4mm), with a gradual reduction in tetragonal distortion as the Eu content increased. Scanning electron microscopy showed the grains shrinking steadily with dopant content, from 15.2 µm in the undoped ceramic to about 1.4 µm at the highest doping level. EDS confirmed the presence of the constituent elements and indicated a relatively uniform elemental distribution within the examined region. Impedance spectroscopy revealed thermally activated conduction with two relaxation processes attributed to grains and grain boundaries, described by an equivalent circuit consisting of two Voigt elements incorporating constant phase elements. The activation energies of the first processes decreased with Eu addition, reaching their lowest values at x = 0.01. The subsequent differences in their concentration dependence suggest that Eu doping modifies the electrical transport processes in grains and grain boundaries. These changes, together with the pronounced grain refinement, may be associated with modifications in defect chemistry and grain-boundary contributions to the overall electrical response. Overall, Eu3+ doping provides an effective means of modifying the microstructure and electrical properties of BCT10 ceramics.

Read PDF

Similar papers

Open access Sep 2026

Effect of La Doping on Structural and Superconducting Properties of (Bi, Pb)-2223 Ceramics

Superconducting ceramics with nominal composition Bi1.6Pb0.4Sr2Ca2-yLayCu3O10+d (0 ≤ y ≤ 0.04); were prepared in pellet form by conventional solid-state reaction method. The samples were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), temperature-dependent resistivity measurements,...

M. Hamel, F. Bouaicha, S. Attaf et al. · 0 citations
Open access Oct 2026

ENHANCING THE ELECTRICAL AND PHOTOCURRENT PERFORMANCE OF YIG NANOPARTICLES VIA Ca AND Zn CO-DOPING

Y2.94Ca0.06Fe4.94Zn0.06O12 nanoparticles were successfully synthesized using the sol-gel method followed by annealing at 1000°C. X-ray diffraction (XRD) confirmed the formation of a single-phase garnet structure with an average crystallite size of 54 nm and a slightly expanded lattice constant (a = 12.395 Å). Detailed...

Thi Thuy Dao · 0 citations
Open access Sep 2026

Influence of Sr Substitution on the Phase Formation and Electrochemical Properties of La1-xSrxMnO3-δ Perovskites

La1-xSrxMnO3-δ (x = 0, 0.15, 0.30 and 0.50) perovskite powders were synthesized by a modified Pechini sol-gel method. Differential thermal analysis revealed that heat treatment at approximately 800 °C is required for complete formation of the perovskite phase. X-ray diffraction analysis showed that the as-synthesized p...

P. Kolkovskyi, M. Kolkovskyi, B. Rachiy et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.