Effect of copper addition on solidification behavior, microstructure and hardness of modified low-Ni ductile Ni-resist alloy
Abstract
Because of their excellent thermal properties and stable austenitic matrix, ductile Ni-resist alloys are widely used in corrosion-resistant and high-temperature applications. However, the high nickel content needed to make traditional Ni-resist alloys raises production costs considerably. To assess the impact of Cu substitution on solidification behavior, microstructural evolution, segregation characteristics, and hardness response, modified ductile Ni-resist alloys with a reduced nickel content (18 weight percent Ni) and varying copper additions (6 to 10 weight percent Cu) were prepared. Induction melting, in-mold nodularization, and inoculation were used to create the alloys. X-ray diffraction (XRD), optical microscopy, scanning electron microscopy (SEM–EDS), and dendritic arm spacing analysis were used to characterize the microstructure. The dendritic arm spacing (DAS) increased from roughly 240 µm to 250 µm, and the secondary dendritic arm spacing (SDAS) increased from 20 µm to 24 µm, indicating that increasing Cu content promoted interdendritic segregation and dendritic coarsening. With increasing Cu addition, graphite nodularity gradually dropped from 75.1 ± 0.3% to 71.3 ± 0.1%, and nodule count dropped from 213.0 ± 1.0 to 201.7 ± 0.6 nodules/mm². Cu enrichment in interdendritic and grain-boundary regions was confirmed by SEM-EDS analysis, whereas Ni remained comparatively evenly distributed within the γ-austenitic matrix. With a γ-Fe content of roughly 94.61%, XRD analysis confirmed that the FCC austenitic phase was stable in all compositions. Due to solid-solution strengthening and solute segregation, macro-hardness in Cu-rich interdendritic regions increased from 160.0 ± 8.7 HB to 194.3 ± 5.1 HB, while micro-hardness increased from roughly 215.7 ± 7.4 HV to 298.3 ± 1.5 HV. The results show that partial substitution of Cu for Ni can preserve a stable austenitic structure while altering the morphology and hardness behavior of graphite, offering valuable information for the creation of less expensive ductile Ni-resist alloys with regulated microstructural performance.