· IISE Annual Conference & Expo 2025· 0 citations
Abstract
In-situ monitoring is crucial in developing control strategies, novel materials processes, tool path design, and a fundamental understanding of laser, powder-blown directed energy deposition (DED). Despite the flexibility of DED in geometries and materials, fabricating parts with uniform quality is still challenging due to localized processing variations. This study establishes an in-situ, parallel monitoring framework for DED, employing a coaxial photodiode array to capture relative melt pool temperature data, laser light, and visible-range melt pool emissions. The coupling between laser absorption and material emission was able to be characterized by correlating photodiode signals with process parameters and spectrometer data. A subset of the photodiodes was integrated into a closed-loop control system to maintain a desired relative melt pool temperature throughout fabricating a single part. This approach mitigates heat accumulation across various build geometries, which can address non-uniform microstructural features within the manufactured component.
The multiphysics nature of Direct Energy Deposition (DED), involving complex interactions among thermal, optical, and material phenomena, drives advancements in metal additive manufacturing but also presents challenges in understanding the underlying mechanisms that govern the process quality and stability. Current res...
Xiao-Yu Zhuang, Khushbu R. Zope, D. Cormier et al.· IISE Annual Conference &...· 0 citations
Large-area magnetron sputtering underpins the manufacture of architectural low-emissivity
glazing, thin-film photovoltaics, flat-panel and flexible displays, and functional coatings, yet the
process remains difficult to control at the fidelity that modern device tolerances demand. The
governing plasma is a strongly non...
Ayomikun Olodo· International Journal of Eng...· 0 citations
An accurate and real-time understanding of the temperature distribution on the electrode surface of a solid oxide fuel cell (SOFC) during operation is crucial for evaluating its performance and state of health. However, reliable operando measurement of their internal temperature distribution remains challenging due to...
Jia-Jin Zheng, Jin-Yue Zhang, Jun-Yu Lu et al.· IEEE Transactions on Instrum...· 0 citations
. Directed Energy Deposition (DED), as a key additive manufacturing technology, is widely used for repairing and fabricating large-scale metal components. However it faces challenges in process stability and quality control. This paper reviews the current research on process monitoring and adaptive control in DED. It f...
Xin-Yi Lin· Proceedings of the 3rd Inter...· 0 citations
Pulsed laser deposition (PLD) is widely used for fabricating kilometer-length coated conductors of superconducting YBa₂Cu₃O₇. Stable deposition and consequently stable superconducting properties are required even under unexpected drifts in process conditions. We developed a process stabilization system consisting of re...
T. Horide, Kosuke Kawabata, Y. Yoshida· npj Advanced Manufacturing· 0 citations
Tritium retention in plasma-facing components(PFCs) must be strictly controlled to ensure the safe operation of fusion devices. In ITER, compliance with the tritium inventory limit and assessment of fuel-removal strategies require in situ monitoring of fuel retention in PFCs. Laser-Induced Breakdown Spectroscopy(LIBS...
J. van Kesteren, J. Ristkok, J. Vernimmen et al.· Nuclear Fusion· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.