Model test study on the inclined pullout bearing characteristics of anchor pile foundations in sand
Abstract
As a critical component for floating offshore platforms, the bearing mechanism of anchor piles under inclined pullout loads remains insufficiently understood. This study utilized physical model tests in dry sand to investigate the effects of varying loading angles and depths. The results reveal that load-displacement curves exhibit a softening characteristic, increasing, then decreasing and stabilizing. Increasing the inclination angle from 30° to 60° shifts the failure mode toward vertical pullout, reducing ultimate bearing capacity and maximum bending moment by approximately 63% and 75%, respectively. Conversely, increasing anchoring depth from 0.22 L to 0.78 L enhances bearing capacity by 45%. While loading depth governs bending moment distribution, axial force undergoes a zero-crossing mutation at the anchor point, manifesting as compression above and tension below. These findings quantify the bearing characteristics of anchor piles, providing a reliable basis for engineering design.