Oct 2026· ACS Applied Polymer Materials· Vol 8, pp. 19790-19802· 0 citations· 63 references
Abstract
Nowadays, lightweight dual-functional polymer composites with great heat conductance and high electromagnetic interference (EMI) shielding performance are urgently needed in modern developing technology. Furthermore, efficient multipaths within network designed with multifunctional fillers in composites prefer to be a better way to balance the heat flow or electromagnetic signal transmission generated in dense integrated electronic devices. In this study, a strategy of graphite-graphene combined network-loaded polyimide (PI) composites was enabled by a scalable and tractable polymer-infiltrated technique. In this network, the microscale reduced graphene oxide (rGO) serves as an adhesive interfacial bridge and thermal network architect, effectively maintaining the macroscale worm-like structure of expanded graphite (EG). The framework was built using a template-free method from hydrogel to aerogel at low temperatures by immersing polyamic acid salt in the ensemble, followed by freeze-drying and final hot-pressing to obtain polyimide composites (rGO@EG/PI). In composites, the microregion network built by macro-micro structured hybrid fillers provides the polymer with multiscale connection channels, leading to an enhancement of the final properties of the samples. The prepared composite exhibits a great thermal conductivity (λ// = 9.4 W·m–1 K–1) with a 47 wt % hybrid filler loading, achieving 1781% higher than the polymer, accompanied by an exceptional level of EMI SE (61 dB). Moreover, the PI composites are found to possess excellent thermal properties, thermal management, and electrical conductivity. With great comprehensive performance, the rGO@EG/PI composites are of good promise for thermal management applications and EMI shielding performance in the field of high integrated technology.
The development of multifunctional composites that combine microwave absorption (MA) with effective thermal management in lightweight structural materials is essential for electronic systems. However, achieving this integration presents significant challenges due to the conflicting demands of electromagnetic attenuatio...
Ji-Ye Mao, Li Cui, Ya-Can Cui et al.· Advanced Functional Material...· 0 citations
Thermal interface materials used in high-power electronic devices must combine efficient heat transfer with mechanical flexibility and suitable thermal stability. However, constructing continuous in-plane and through-plane heat-conduction pathways at low filler loadings while preserving mechanical properties remains ch...
Guo-Jun Cheng, Ming Yan, Ya-Ling Zhang et al.· Coatings· 0 citations
Ceramic matrix composites serve as crucial structural materials for hot-section components in next-generation aeroengines and aerospace propulsion systems. As functional reinforcements, graphene fillers have been introduced into ceramic matrices to form graphene–ceramic matrix composites (GCMCs), with the potential for...
Ke-Nua Zhao, Chao Li, Jian-Bo Feng et al.· Propulsion and Energy· 0 citations
A multifunctional composite was strategically designed to simultaneously address thermal management and electromagnetic interference (EMI) shielding challenges in next-generation high-performance electronics. The composite was fabricated by filling a three-dimensional nickel foam with a waterborne polyurethane (WPU) ma...
Qi-Zhao Zeng, Bin-Kai Hu, Shi-Hua Yang et al.· Journal of materials science...· 0 citations
The rapid trend toward miniaturization and integration of microelectronics necessitates dielectric materials featuring both low permittivity and excellent thermal conductivity to mitigate signal delay and heat accumulation. Herein, a metal organic framework material MIL‐101(Cr)@carbon nanotube (M@CNT) coating structu...
Zheng-Yuan Liu, Rui-Hong Ning, Dan-Dan Yang et al.· Polymer Engineering & Sc...· 0 citations
Electromagnetic interference (EMI) poses increasing challenges for compact electronic systems and emerging 5G/6G technologies, driving demand for Electromagnetic (EM) absorbers that are lightweight, low-cost, and environmentally sustainable. Conventional absorbers rely on ferrites, magnetic nanomaterials, and multi-ste...
M. Ouda, M. Kandah, A. Krishna et al.· Polymers· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.