Skip to content

An Analysis Method for the Static Stability of Helicopter Rotor in Level Flight Based on Flight Test

Sep 2026 · SAE technical paper series · Vol 1 · 0 citations · 4 references

Abstract

To provide better data support for the aerodynamic design, flight control system design, and parameter optimization of helicopters, it is necessary to obtain the aerodynamic derivatives of the helicopter rotor based on flight test data and analyze the static stability of the helicopter rotor. This paper breaks through the limitations of aerodynamic testing of helicopter rotors and establishes a quantitative analysis method for the static stability of helicopter rotors in level flight based on flight test data. Based on the flight test data of the helicopter, this study establishes an aerodynamic model of the helicopter rotor and employs a genetic algorithm for parameter identification to obtain the aerodynamic derivatives of the rotor in level flight. The identified parameters are then used to quantitatively analyze the static stability of the helicopter rotor. The results show that the method developed in this study can accurately and effectively obtain the aerodynamic derivatives of the helicopter rotor from flight test data. Furthermore, this method can reliably evaluate the static stability of the helicopter rotor, demonstrating significant value for engineering applications.

View source

Similar papers

Sep 2026

CFD-Based Aerodynamic Stability Analysis of a Quadrotor UAV

This study analyzes the aerodynamic stability of a typical quadrotor UAV during hover and vertical flight using Computational Fluid Dynamics (CFD). A fitted relationship between single propeller rotational speed versus lift and torque was obtained through simulation. Rotor speed input parameters were determined by comb...

Hai-Yuan Zhao, Jia Li, Jia-Feng Song · 0 citations
Open access Oct 2026

An Alternative Method for Determining the Drag Force of Fixed-Wing Unmanned Aircraft Systems

It is noted that in agriculture, fixed-wing unmanned aircraft systems successfully perform the tasks of crop monitoring, pest and disease detection across large areas remote from the operator. Further improvements in unmanned aircraft speed, flight range, and payload capacity can be achieved by reducing aerodynamic dra...

P. A. Averichkin, D. Gritsay, P. I. Chumak · 0 citations
Open access Sep 2026

Comparative analysis of the kinematic schemes of a tiltrotor based on URANS modeling

Due to the growth of the unmanned aerial vehicle (UAV) market and the specific tasks they perform, the design of convertible aircraft, such as convertiplanes, is becoming increasingly relevant. These aircraft combine the advantages of helicopters and airplanes: they can take off and land vertically from unprepared surf...

А. S. Batrakov, L. Garipova, М. А. Kauchakova · 0 citations
Preprint Aug 2026

Optimized Modular Design and Development of a Tilt-Rotor Bicopter Drone

Hybrid systems like tilt-rotor bicopter drones combine the beneficial characteristics of both fixed-wing and rotary-wing technology, enabling long endurance and VTOL capability. However, such drones also require an optimum design to ensure both static and dynamic stability. The modular design of a traditional bicopter...

S. Verma, Nimisha Tatapudi, Akshay Arjun et al. · 0 citations
Conference Open access Sep 2026

Comparative study on optimal release point for helicopter airdrop based on analytical method and genetic algorithm

During helicopter airdrop operations, the variation of wind with height significantly affects the landing accuracy of the dropped object. This paper aims to compare the landing errors of the analytical method and the genetic algorithm when solving the optimal release point. First, the vector averaging method is used to...

Luan-Ying-Wang-Guo-Liang Zhao, Xing Guo, Zhou Yu et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.