Skip to content
Preprint

Non-destructive 3D doping imaging of silicon sensors

Sep 2026 · 0 citations · 29 references
Physics

Abstract

Silicon sensors are the foundational detection medium for X-rays and charged particles. While their bulk dopant distribution determines device performance, it is conventionally assumed homogeneous because traditional profiling is destructive, spatially restricted, and insensitive at the relevant concentrations. Here we introduce a non-destructive 3D doping imaging technique that turns the readout electronics of a charge-integrating hybrid pixel detector into a massively parallelized capacitance-voltage profiler. With a few tens of micrometres of 3D resolution over wafer-scale areas at concentrations on the order of $10^{11}$ cm$^{-3}$, we image the bulk doping concentration of operational sensors. Macroscopically, we resolve depth-evolving concentric doping rings; microscopically, we uncover scattered doping anomalies that distort local electric fields. The rings modulate the depletion voltage, while the anomalies disrupt local charge collection, a previously overlooked cause of pixel yield and performance degradation. By bridging manufacturing signatures with microscopic defects, this approach provides a non-destructive framework for sensor characterization and yield optimization.

View source

Similar papers

Oct 2026

Thin 3D trench silicon detectors with submicron electrodes: spatially resolved study of charge multiplication and timing properties using TPA-TCT

The increasing luminosity of modern high-energy particle colliders demands radiation-hard silicon detectors with high spatial and temporal resolution. In this work, we investigate a novel thin 3D silicon detector featuring submicron columnar electrodes fabricated using an advanced 8-inch CMOS process. The device, with...

G. Laštovička-Medin, G. Kramberger, H. Ji et al. · 0 citations
Oct 2026

Wide-Field Quantum Diamond Magnetic Microscopy at Nanotesla Sensitivity for Non-Destructive Semiconductor Failure Analysis

Failure analysis (FA) of advanced semiconductor packages is increasingly constrained by the inability of established techniques to image faults buried inside 2.5D and 3D integrated devices. Magnetic current imaging offers a non-destructive route to localising buried currents through opaque packaging, but no existing...

Samuel Mondberg, Luis D. Bonavena, T. K. Pfau et al. · 0 citations
Open access Oct 2026

Simulation of 3D 4H-SiC pixel sensors

3D silicon pixel detectors are widely used in high-radiation environments owing to their short carrier collection paths and fast timing response. However, future high-luminosity collider experiments demand radiation hardness beyond what standard silicon can provide, as well as relaxed cooling requirements. 4H Silicon C...

E. S. Hamdani, J. Ye, M. Boscardin et al. · 0 citations
#edge computing Oct 2026

Quantum Diamond Microscopy as a Non-Destructive Method for Short Localization in High-Density 2.5D MIMCAP

The increasing demand for compute power is pushing system scaling toward advanced 3D and backside-integrated architectures. While the wafer backside opens a dynamic design space with new opportunities to optimize power delivery in scaled systems, it also introduces significant challenges for failure analysis (FA). In...

K. J. P. Jacobs, D. R. Glenn, C. Hart et al. · 0 citations
Oct 2026

Automated High-Resolution SIMS Nanoanalytics for Advanced Semiconductor Failure Analysis

As semiconductor devices continue to scale in complexity and dimensionality, conventional analytical techniques such as SEM-EDS increasingly fall short in providing the spatial resolution and chemical sensitivity required for advanced failure analysis. Deeply buried interfaces, three-dimensional architectures, and ul...

P. Gnauck, Alexander D. Ost, Torsten Richter · 0 citations
Open access Sep 2026

Non-destructive silicon quantification in low-level Si-doped diamond-like carbon films

Diamond-like carbon (DLC) films offer exceptional mechanical and chemical properties but face limitations in adhesion and thermal stability, which restrict their broader applications. Current characterization methods for silicon-doped DLC films rely on destructive techniques, which pose challenges for industrial qualit...

P. Poolcharuansin, Nanthapat Chanapai · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.