Skip to content
Conference Open access

Comparative Study and Optimization of Hole Transport Layers for High-Efficiency Lead-Free Cs 2 AgBiBr 6 /c-Si Tandem Solar Cells

2026 · E3S Web of Conferences · 0 citations · 12 references

Abstract

Lead-free double perovskite Cs 2 AgBiBr 6 has emerged as a promising candidate for eco-friendly photovoltaic applications due to its intrinsic high stability, non-toxicity, and a wide bandgap of 1.64 eV, which is ideal for top-cell applications in tandem devices. However, identifying suitable hole transport materials to optimize the device structure is crucial for realizing its full potential. In this study, we utilized SCAPS-1D software to simulate and optimize the performance of Cs 2 AgBiBr 6 -based solar cells and their 2-terminal (2T) tandem application with crystalline silicon (c-Si) bottom cells. Through a preliminary screening of four hole transport layers (HTLs)—Spiro-MeOTAD, MoS 2 , NiO, and CuSCN—MoS 2 was identified as the superior candidate. Subsequently, we systematically optimized the MoS 2 -based device, which demonstrated excellent carrier extraction capabilities and favorable band alignment, yielding a champion single-junction power conversion efficiency (PCE) of 24.87%. Furthermore, for the tandem configuration, we calculated the spectrum transmitted through the top cell to serve as the incident light source for the bottom cell, subsequently performing rigorous current matching by varying the thicknesses of the Cs 2 AgBiBr 6 absorber (0.1–1.0 μm) and the c-Si substrate (50–300 μm). The optimal balance was achieved at a top-cell thickness of ~0.58µm and a bottom-cell thickness of 250 μm, resulting in a matched short-circuit current density (J sc ) of 21.64 mA/cm². Consequently, the optimized tandem device demonstrated remarkable performance parameters, including a V oc of 2.120 V, a fill factor of 81.65%, and a total PCE of 37.46%. These findings provide valuable design guidelines for high-efficiency lead-free perovskite/silicon tandem solar cells.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.