Effect of Plastic Deformation on the Microstructure and Mechanical Properties of an Al-Li-Cu-Mg Alloy after Aging

Deformation Behavior of an Al-Ce-Fe-Ni-Zr Alloy Fabricated by L-PBF

Effect of Dynamic Plastic Deformation and Subsequent Aging on the Microstructure and Mechanical Properties of an Fe–Mn–Al–Mo–C Lightweight Steel

The microstructure and mechanical properties of an Fe–26Mn–8Al–1.2C–3Mo lightweight steel subjected to dynamic plastic deformation (DPD) at a strain of 0.3 or 0.5 and subsequent aging at 550 °C were investigated. The results show that DPD introduces a high density of dislocations and a significant grain refinement, lea...

The Effect of Thermomechanical Treatment on the Microstructure and Mechanical Behavior of an Austenitic Steel Containing 1.4% Al and 17.5% Mn

Effects of Aging Treatment on the Microstructure and Mechanical Properties of Ti–5Cu Alloy

Effect of severe plastic deformation and heat treatment on the structural, mechanical and tribological properties of Cu-9Al-2Mn bronze

Introduction. Severe plastic deformation (SPD) is one of the most promising methods for modifying the structure of non-ferrous alloys, enabling them to be transformed into ultrafine-grained (UFG) and nanocrystalline states. At the same time, for the practical implementation of such materials in machine-building equipme...

Effect of the Application of Cold Working on the Aging Response and Mechanical Properties of an Al–4Cu–1.4Mg–0.6Ag Alloy

This study investigates the effect of cold working on the aging response and mechanical properties of an Al–4Cu–1.4Mg–0.6Ag (wt %) alloy. The alloy was produced from pure elemental constituents and processed by casting, homogenization, hot rolling, and solution heat treatment. Following solution treatment, approximat...