Skip to content
Preprint

Dual Fluid Antenna-Assisted UAV MIMO Networks

Jul 2026 · 0 citations · 14 references
Engineering

TL;DR

This letter investigates a dual FA-assisted UAV network for MU-Multiple-Input-Multiple-Output (MIMO) downlink communications, aiming to maximize the average achievable rate through the joint optimization of UAV trajectory, the transmit/receive FA positions, and beamforming.

Abstract

Fluid Antennas (FAs)-assisted Unmanned Aerial Vehicle (UAV) networks leverage the FA position adaptivity and flexible beamforming to overcome the limitations of Fixed-Positioned Antennas (FPAs) in dynamic UAV channels and Multi-User (MU) interference. This letter investigates a dual FA-assisted UAV network for MU-Multiple-Input-Multiple-Output (MIMO) downlink communications, aiming to maximize the average achievable rate through the joint optimization of UAV trajectory, the transmit/receive FA positions, and beamforming. The formulated problem is highly coupled and non-convex. Accordingly, an efficient Alternating Optimization (AO)-based algorithm is developed for decomposed subproblems, yielding a suboptimal solution. Numerical results demonstrate significant performance gains of 120% and 110% over conventional FPA-based and existing FA-based baselines, respectively.

View source

Similar papers

2026

Movable Antenna-Enhanced UAV-to-UAV Communication With Full 3-D Coverage

In this paper, we investigate a movable antenna (MA)-assisted uncrewed aerial vehicle (UAV) swarm communication system. Unlike conventional fixed-position antenna (FPA) systems, each UAV is equipped with an MA array distributed on two hemispherical surfaces at the head and tail, significantly expanding the spatial degrees of freedom (DoFs) in three-dimensional (3-D) seamless coverage. A far-field line-of-sight (LoS) channel model is adopted to characterize the UAV-to-UAV (U2U) communication links, incorporating both antenna positioning and radiation patterns. We formulate an achievable sum rate maximization problem by jointly optimizing the antenna position vectors (APVs) and transmit/receive beamforming vectors, subject to constraints on maximum transmit power, limited antenna moving region, and minimum inter-antenna spacing. To tackle this non-convex and highly coupled problem, we propose a two-loop iterative optimization algorithm that effectively combines the Spider Wasp Optimizer (SWO) for APV optimization and alternative optimization (AO) for beamforming design. Extensive simulation results demonstrate that the proposed MA-assisted scheme outperforms traditional FPA systems and other benchmark algorithms under various settings. The performance gains are attributed to the efficient optimization of antenna positions within the hemispherical moving region for interference suppression and coverage enhancement.

Fansheng Song, Lipeng Zhu, Xiangyu Pi et al. · 0 citations
Jul 2026

CRB-Driven Beamforming and Trajectory Optimization for UAV-assisted ISAC System

Simulation results demonstrate that the proposed method significantly reduces the time-averaged CRB by over 10%, compared with the ISAC system without UAV assistance, and also achieves a higher sensing accuracy than both the fixed-UAV-trajectory and the maximum-ratio-transmission-based beamforming benchmarks.

Yi Yang, Qianqian Zhang, Huaxia Wang · 0 citations
Preprint Aug 2026

Energy Efficient Multi-User Beamforming and 3D Position Optimization for SIM-Assisted UAVs

This paper studies energy-efficient downlink multi-user transmissions with unmanned aerial vehicle (UAV) communication systems equipped with stacked intelligent metasurfaces (SIM), enabling wave-domain analog beamforming through multiple cascaded metasurface layers, while low-dimensional digital precoding is carried out using a limited number of transmit radio-frequency chains. This architecture enables flexible electromagnetic wave manipulation with reduced hardware complexity, making it particularly suitable for energy-constrained aerial platforms. We formulate a hardware-aware energy-efficiency (EE) maximization problem aiming to jointly optimize the digital precoder, the phase shifts of all SIM layers, and the three-dimensional UAV position under transmit-power, SIM operation, and UAV deployment constraints. The resulting problem is highly non-convex due to the fractional objective, the cascaded SIM structure and the unit-modulus phase constraints of the constituent metasurface layers, as well as the non-linear UAV-dependent channel. To address these challenges, we develop a transform-based alternating optimization framework that combines Dinkelbach's method, dual and quadratic transforms, to enable closed-form digital beamforming, Riemannian manifold optimization for SIM phase shifts, and successive convex approximation (SCA) for UAV positioning. Convergence and complexity analyses are provided to characterize the proposed algorithm. The presented numerical results showcase that the proposed joint design significantly improves EE compared with fully digital and maximum ratio transmission benchmark schemes, while revealing important design trade-offs among transmit power, SIM size, and the number of its constituent stacked layers.

C. K. Sheemar, Giovanni Iacovelli, Sourabh Solanki et al. · 0 citations
Jul 2026

Rethinking Joint UAV Placement and Beamforming: A Correlation-Aware Geometric Approach

Simulation results demonstrate that UAV placement should be designed not only for desired-link enhancement but also for interference mitigation through geometry-aware user separation through geometry-aware user separation.

Chaeyeon Kim, Kisong Lee · 0 citations
Open access Aug 2026

Joint Beamforming and Trajectory Optimization Algorithm for RSMA-UAV-Enabled Integrated Sensing and Communication System

An unmanned aerial vehicle (UAV)-enabled ISAC system employing rate-splitting multiple access (RSMA) and a joint beamforming and trajectory optimization framework is investigated and results demonstrate that the proposed algorithm significantly improves the achievable system downlink rate.

Shunxuan Wang, Qi Zhu · 0 citations
2026

Energy Efficiency Maximization for RIS-UAVs Aided Communication Networks: A Joint Optimization Framework

In this letter, we propose an efficient resource allocation algorithm for communication systems assisted by multiple uncrewed aerial vehicles borne reconfigurable intelligent surfaces (RISs). The algorithm jointly optimizes the base station (BS) power allocation, active beamforming and RIS phase shifts to maximize the system energy efficiency (EE). As the EE maximization problem is a multi-variable coupling problem with non-convexity, we adopt a Dinkelbach-based block coordinate descent framework to decouple it into three subproblems. The BS power allocation and active beamforming subproblems are solved using fractional programming and Riemannian conjugate gradient algorithm, respectively. For the RIS phase shifts optimization, we propose a low-complexity momentum-accelerated coordinate descent algorithm. Numerical results validate the effectiveness of our joint optimization framework.

Xinying Guo, Pupu Zhao, Jiankang Zhang et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.