A tactile-driven model predictive controller for adaptive and delicate execution of diverse dexterous grasps that imposes no restrictions on grasp types or contact configurations and integrates seamlessly with state-of-the-art grasp pose generation methods.
Abstract
While recent research has focused heavily on dexterous grasp pose generation, less attention has been devoted to the execution of planned grasps. Under shape and position uncertainty, open-loop execution often yields uncoordinated contacts, causing undesired in-hand object motion and even grasp failures. To address this, this paper proposes a tactile-driven model predictive controller for adaptive and delicate execution of diverse dexterous grasps. Our approach emphasizes multi-contact coordination across both approaching and grasping phases, with three key novelties: (i) coordination-aware phase separation, (ii) arm-hand coordination to compensate for position errors, and (iii) adaptive force coordination to increase contact forces in a balanced manner. An analytical model is employed to relate contact forces to robot joint motions for predictive control. Our formulation imposes no restrictions on grasp types or contact configurations and integrates seamlessly with state-of-the-art grasp pose generation methods. We validate the approach through large-scale simulations involving 15k grasps across 478 objects on three robotic hands, and real-world experiments on 8 objects. Results demonstrate that our method achieves higher grasp success rates and reduced undesired object movements.
Dual-arm robots often encounter difficulties when handling easily deformable or structurally complex objects using traditional grasping-based manipulation. In addition, grasping and releasing operations introduce significant time overhead. To address these limitations, this paper proposes a vision-based predictive control framework for dual-arm nonprehensile transportation. The proposed method employs a hybrid end effector design that integrates an elastic tether with a tray, enabling flexible and stable transportation without direct grasping. A predictive control strategy is adopted to optimize dual-arm motion trajectories on the move under kinematic and safety constraints. To further enhance coordination accuracy, a direct visual servoing scheme is incorporated to dynamically regulate the arm velocities, minimizing relative motion between the end effectors and the object. This effectively suppresses oscillations induced by the elastic tether. Both simulation and experimental results demonstrate that the proposed approach ensures convergence to desired states and achieves continuous, stable, and safe object transportation, even in the presence of disturbances.
Chang Liu, Yuan Yang, Panfeng Huang et al.· 2026 IEEE International Conf...· 0 citations
This work proposes a real-world bimanual grasping framework that includes a multimodal dataset capturing joint angles, visual observations and force signals; a Denoising Diffusion Probabilistic Model (DDPM)-based module that generates joint-level grasp configurations from segmented point clouds; and an execution strategy that integrates motion planning with online grasp refinement to ensure physical stability and feasibility.
Ziming Li, Mingxuan Wu, Jiaqi Zhang et al.· 0 citations
Robotic throwing enables fast object transport and extends a robot's reachable workspace beyond traditional pick-and-place. While prehensile (grasp-based) throwing works well for graspable items, non-prehensile (grasp-free) throwing is better suited for large, heavy, and/or deformable objects. Existing approaches rely on model-based optimization with simplified contact models (e.g., dynamic grasping) and low-dimensional trajectory parameterizations, which limit solution quality and reachable workspace. We propose a reinforcement learning approach that additionally leverages sliding and rolling contact modes and directly optimizes joint-space trajectories without analytical contact models or custom parameterizations. The Markov Decision Process (MDP) is formulated as a dynamical system that evolves the robot's joint state conditioned on the throwing target, object model, and initial configuration. Joint-jerk trajectories are planned offline at a low control rate and upsampled into smooth, high-rate velocity commands for deployment. For sim-to-real transfer, we minimize the robot-dynamics gap through minimum-jerk system identification and train uncertainty-aware policies to mitigate object-modeling errors, particularly sensitivity to dynamic friction. In simulation, the policy achieves 99% success across thousands of configurations and generalizes to unseen objects. Sensitivity analysis shows robustness to mass uncertainty but high sensitivity to dynamic friction, consistent with the sliding-based release mechanism. Deployed zero-shot on a UR5e operating near its physical limits (5 m/s end-effector velocity), our method throws diverse objects including heavy (790 g) and large (20x20x28 cm) items to targets up to 350 cm distance or 180 cm elevation, achieving a 97% real-world success rate.
Abdullah Mustafa, Ryo Hanai, I. Ramirez-Alpizar et al.· 0 citations
GraspGraphNet is introduced, a topology-aware grasp generation framework that represents each hand as a URDF-derived kinematic graph and directly generates executable palm poses and joint configurations and suggests that graph-structured hand representations can effectively support dexterous grasp generation across robot hands with different kinematic structures.
Y. Lee, Taeyeop Lee, Hyosup Shin et al.· arXiv.org· 0 citations
This work proposes a unified visuo-tactile-fusion grasping framework that integrates grasp generation, feasibility prediction, and adaptive refinement and introduces an efficient visuo-tactile representation that tightly fuses object geometry with tactile feedback by associating tactile signals with finger identities.
Xirui Liang, Jiaqi Liang, Jing-Kai Xu et al.· 0 citations
TAC-LOCO is proposed, a tactile-augmented unified reinforcement learning framework that encodes tactile array observations from compliant grippers into a compact latent representation and joins it with proprioception for unified control of the legs, arm, and gripper.
Muqun Hu, Yu-Hao Zhou, K. Malik et al.· arXiv.org· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.