Skip to content

Solvent-Free Ball Milling Combined with Hot Pressing for Fabrication of PLA@LM Functional Composites with Hydrolytic Degradability

Sep 2026 · ACS Sustainable Chemistry & Engineering · 0 citations · 55 references

Abstract

The integration of liquid metals (LM) into biodegradable polymer matrices offers a promising route toward functional sustainable composites, while it is often hindered by solvent residues, poor dispersion, and compromised mechanical properties. Herein, we report a solvent‑free, two‑step strategy combining vibrational ball milling (BM) with hot pressing to fabricate PLA@LM composites with hydrolytic degradability. During BM, bulk eutectic gallium‑indium (EGaIn) is in situ broken into micro‑/nanodroplets under high‑energy mechanical shearing, while PLA chains concurrently coat the droplets via hydrogen bonding with the Ga2O3 surface layer, preventing coalescence and further oxidation. Subsequent hot pressing yields a segregated conductive network at low LM loading (<5 wt %). The resulting PLA@LM composite (5 wt % LM) exhibits simultaneously enhanced strength (≈19 MPa) and toughness (≈0.51 MJ/m3), a 120% increase in thermal conductivity (≈0.32 W·m−1·K−1), and a transition from insulating to weakly conductive behavior with a conductivity of 1.33 × 103 S/m and a percolation threshold as low as 0.08 vol %. Moreover, the composite exhibits significant mass loss (>95%) in alkaline aqueous solution (pH = 9) within 8 days. This green, scalable solid‑state approach eliminates organic solvents and additional stabilizers, opening a new avenue for high‑performance, fully biodegradable functional composites.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.