A large-section tunnel has a large excavation span and high construction difficulty and is prone to roof fall and collapse and other engineering disasters under complex geological conditions. Due to the influence of the size effect, it is difficult for surrounding rock to form an arch and form an effective load-bearing structure. A timely and proactive anchoring support system is required to fully utilize the self-bearing capacity of the surrounding rock. Therefore, this paper studies a case of high-prestressed active support based on a large cross-section tunnel in eastern China, clarifying that high-prestressed active support can effectively control rock stress, plastic zone distribution, and surrounding rock deformation. Based on a prestress conversion test, the support structure and application method that meet the high-prestress application requirements of the tunnel engineering site are clearly defined. An active support field test was carried out, and the influence of prestress on the supporting structure stress and the surrounding rock deformation was analyzed. The results show that compared with a no-prestress support scheme, active support with 100 kN high prestress increased the utilization rate of anchor rod strength by 35.29%, reduced the external load on the arch by 40.9%, and reduced the settlement of the arch crown by 34.9%. This indicates that high-prestressed active support can improve the self-bearing capacity and control effect of the surrounding rock.
Excavation-induced unloading alters the stress distribution and support demand in high and steep rock slopes. This study investigates a rock slope near the mainline toll station of the Xiangyang–Yichang Expressway. A FLAC3D model simulates seven-stage excavation. Displacement, plastic-zone distribution, factor of safet...
Continuous TBM advance in coal-mine roadways is commonly accompanied by a spatial lag between excavation and support installation, which may aggravate nonuniform mechanical responses in layered formations. This study investigates the 12150 auxiliary ventilation roadway in composite strata. A three-dimensional FLAC3D mo...
Surrounding rock deformation and loosening zone thickness are critical parameters for tunnel support design and stability evaluation. This study examined the variable-cross-section Qingshan Tunnel on the Ren-Zun Expressway. Systematic field monitoring measured surrounding rock pressure, displacement, and loosening zone...
Nai-Tao Zheng, You-Yun Li, Zhi-Feng Wang et al.· Frontiers in Earth Science· 0 citations
Large deformation of surrounding rock is a critical challenge during TBM tunnelling in deeply buried high
in situ
stress soft rock, where delayed deformation and insufficient support stiffness may lead to support failure and machine jamming. However, the quantitative influence of rock bolt support parameters on def...
Zhen-Xing Yang, Kai Zhang, Yu-Lu Li et al.· Frontiers in Earth Science· 1 citation
Due to the limited drilling accuracy of the drilling jumbo, the unavoidable outward inclination of perimeter blastholes is a key factor causing overbreak and damage to the remaining rock mass. However, effective methods to control this issue remain limited. In this study, a combined approach of laboratory blasting ex...
Qiao-Yu Gao, P. Yan, Xiang-Feng Wang et al.· Journal of engineering mecha...· 0 citations
There are some problems in the transition zone of an asymmetric bifurcated tunnel with a super-large cross-section, such as a sudden change in section size and asymmetric unloading, which can easily cause problems such as uneven stress and deformation of surrounding rock and local stress concentration of support in the...
Can Xie, Rui Wang, Ze-Fa Wang et al.· Coatings· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.