Deep Eutectic Solvent-Mediated
Conductive Polyurethane
Elastomers with Synergistic Self-Healing, Adhesion, and Wide-Temperature
Sensing for Wearable Health Monitoring
These results demonstrate a DES-mediated strategy for balancing mechanical, ionic, interfacial, and sensing functions while also identifying mild-temperature healing and quantitative long-term retention as areas requiring further optimization.
Abstract
Conductive elastomers have attracted considerable interest for electronic skin and wearable health-monitoring devices. Although soft and self-healing polyurethane elastomers have been extensively developed, the simultaneous integration of mechanical robustness, stable ionic conductivity, recovery of both mechanical and electrical functions, interfacial adhesion, cyclic durability, and reliable sensing over a wide temperature range remains challenging. In particular, increasing polymer-chain mobility may promote ion transport and interfacial healing but can compromise mechanical strength and dimensional stability, whereas reinforcement of the polymer network may restrict molecular diffusion and ionic migration. To address these trade-offs, we introduce a ChCl/AA deep eutectic solvent (DES) into a dynamic polyurethane (PU) network through solvent exchange. The optimized PU-DES-4 exhibits a tensile strength of 2.71 MPa and an ionic conductivity of 3.81 × 10–2 S m–1 at 25 °C. Its self-healing behavior is strongly temperature dependent: mechanical recovery exceeds 90% after healing at 60 °C for 3 h but reaches approximately 50% and 65% after 12 h at 25 and 37 °C, respectively. The material also shows spontaneous room-temperature adhesion, with a metal lap-shear strength of approximately 138 kPa without thermal activation; this value increases to 2.67 MPa after thermal conditioning at 60 °C for 30 min. In addition, PU-DES-4 maintains stable sensing performance from −20 to 50 °C and supports wearable motion and physiological signal monitoring. These results demonstrate a DES-mediated strategy for balancing mechanical, ionic, interfacial, and sensing functions while also identifying mild-temperature healing and quantitative long-term retention as areas requiring further optimization.
Stretchable solid-state ionic conductive elastomers (SICEs), serving as essential materials for ionotronic devices, exhibit great promise in emerging applications in electronic skin, soft robotics, especially in wearable sensors. Nevertheless, the development of such materials with high strength, self-healing, and ioni...
Ming-Liang Wu, Quan-Yong Cheng, Yi-Dong Li et al.· Advances in Materials· 0 citations
Elastomer-based flexible and stretchable sensors have attracted considerable research interest for promising applications in areas, such as human-machine interfaces, physiological monitoring, and soft robotics. Despite the typical trade-off between transparency, mechanical strength, and self-healing in elastomers, whic...
Qian Zhang, Xiao-Tao Wang, Zhi-Jie Zhang et al.· ACS Applied Materials and In...· 0 citations
Flexible conductive materials have emerged as ideal candidates for soft robots, wearable devices, and micro-nanogenerators. However, developing high-performance conductive materials that combine good stability, exceptional mechanical properties, self–healing capabilities, and high ionic conductivity remains a challen...
Jing-Shi Liang, Zi-Fei Zhao, Xiao-Lin Shi et al.· Langmuir· 0 citations
Skin-friendly ionogels with multi-scenario adaptive, high-fidelity, and self-healing performances were critical building units in wearable signal transmission devices and provided a new avenue for flexible wearable sensors and promoted the development of remote mechanical control systems.
Hao-Ran Zheng, Rui Guan, Hao-Ran Wang et al.· Small· 0 citations
Effective monitoring of mechanical stimuli such as pressure and torsion is essential for guiding wound management, yet current pressure-sensitive adhesives rarely integrate stable sensing, tissue-compatible adhesion, and antibacterial protection. Here, we develop a multifunctional conductive pressure-sensitive adhesive...
Zhen Huang, Jiaxin Zhang, Yi-Fan Ma et al.· ACS Applied Materials and In...· 0 citations
The rapid growth of modern electronics and 5G communication has created a strong demand for flexible electromagnetic interference (EMI) shielding materials; however, achieving high shielding effectiveness in polymer composites typically requires large amounts of conductive fillers, often at the severe cost of mechani...
Yang Luo, Wen-Yu Wan, Pengcheng Deng et al.· ACS Applied Polymer Material...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.