Skip to content
Review Open access

IoT Cloud-Based Portable Power Quality Monitoring System With Dual-Path Wireless Communication

2026 · IEEE Access · Vol 14, pp. 134436-134453 · 0 citations · 49 references

TL;DR

The development and validation of an IoT cloud-based portable Power Quality Monitoring (PQM) system for low-voltage three-phase and single-phase electrical distribution networks was presented and it was verified that no measurement records were lost during communication failure tests or power outages.

Abstract

This paper presents the development and validation of an IoT cloud-based portable Power Quality Monitoring (PQM) system for low-voltage three-phase and single-phase electrical distribution networks. The design phase integrated the set of parameters and aggregation procedures specified in the IEC 61000-4-30 standard for Class S statistical surveys. The printed circuit board developed for the portable PQM system also adheres to the IPC-2221B and IEC 60664-1 design standards, with a documented galvanic isolation barrier between the power grid interface and the digital processing stage. The measured parameters include RMS voltages and currents, phasor diagram, phase angles between the signals, phase frequency, active, reactive, and apparent power, power factor, VTHD, ITHD, voltage and current unbalance, voltage sags, swells, interruptions, and device deployment location. The portable PQM is powered by the power network being monitored; in the event of a power outage, it automatically switches to an integrated backup battery, guaranteeing uninterrupted measurement and data transmission. The acquired data are transmitted to an IoT cloud platform via Wi-Fi or 4G LTE using the MQTT protocol, with automatic failover between routes. An SD card buffers data when connectivity is lost and retransmits them chronologically once connectivity is restored. Laboratory experimental tests conducted with a three-phase AC induction motor and a single-phase nonlinear load showed measurement agreement within 1 % with respect to a Class S commercial power quality analyzer for all electrical parameters analyzed. Furthermore, it was verified that no measurement records were lost during communication failure tests or power outages.

Read PDF

Similar papers

Open access Sep 2026

Design of an IoT System for Real-Time Power Quality Monitoring in Electric Power Distribution Systems

The complete gateway hardware cost is under USD 4, making the approach economically viable for retrofitting legacy industrial monitoring installations, and positioned as a retrofit enabler for medium-voltage feeders that supply sustainable transportation infrastructure such as electric-vehicle chargers and urban-rail s...

Yuli Prasetyo, Budi Triyono, Dimas Nur Prakoso · 0 citations
Conference Open access 2026

Development and Evaluation of an IoT-Based Electrical Measurement System for Smart Engineering

The design and experimental assessment of a portable electrical measurement platform that uses Internet of Things (IoT) technology for continuous measurement and remote observation and its suitability for electrical engineering measurement and system analysis is reported.

S. Haryudo, Widi Ariwibowo, Ervin Yohanes et al. · 0 citations
Open access Aug 2026

An IoT-Enabled Edge Intelligence Framework for Real-Time Fault Monitoring in Power Distribution Networks

The proposed framework provides a scalable smart distribution monitoring platform and a future enhancement path towards implementation with hardware, event logging, fault-location techniques and machine-learning based fault classification.

H. Ali, R. Asif, Muhammad Rizwan · 0 citations
Open access Sep 2026

Development of an Integrated IoT-based Monitoring System for a Three-Phase Induction Motor Using ESP32 and Industrial Power Meter

The validated platform provides a foundation for future LSTM-based predictive-maintenance research on three-phase induction motors and demonstrates consistent near-real-time monitoring, high HTTP transmission success, and complete sequence integrity within the validated database records.

Nandar Nandar, A. Fadlil, Tole Sutikno · 0 citations
Open access 2026

Development and Evaluation of a Multi-Sensor IoT System for Real-Time Condition Monitoring and Fault Classification of an Industrial Electric Motor

Industrial electric motors require continuous condition monitoring because developing electrical, thermal, and mechanical abnormalities can lead to unplanned shutdowns and equipment damage. This study developed and evaluated a multi-sensor Internet of Things system for real-time condition monitoring and fault classific...

Emina E. Etomi, Nneka M. Obi, D. Onyishi · 0 citations
Open access Aug 2026

Design and Development of an Internet of Things (IoT) Based Automatic Transfer Switch (ATS) Monitoring System Using an Expert System Approach For Electrical Energy Backup

An Internet of Things (IoT)-enabled Automatic Transfer Switch (ATS) monitoring system based on an expert system approach for electrical energy backup to enable adaptive, rule-based decision-making that overcomes the rigidity of conventional fixed-threshold ATS systems.

Rafiuddin Syam, Ara Akdzal Al Tariq, Efri Sandi et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.