2026· MATEC Web of Conferences· 0 citations· 10 references
Abstract
To clarify the aerodynamic performance boundaries and applicable scenarios of the classic four-digit NACA airfoil under high-Reynolds-number conditions, this paper takes the NACA2412 cambered airfoil and the NACA0012 symmetrical airfoil as the research objects. Using the fluid mechanics numerical simulation method and based on the k-ωSST turbulence model, a two-dimensional numerical simulation is carried out. The lift and drag characteristics, surface pressure distributions, and flow-field velocity evolution laws of the two airfoil types at a Reynolds number of 2.2×10⁶ and an angle of attack (AoA) range of 0°to 18°are systematically analyzed. The results show that cambering the NACA2412 airfoil enables it to exhibit non-zero lift. Positive lift can be generated at the 0°AoA, and the lift-curve slope within the 0° to 12° AoA range is 0.098/°. Before stall, the cambered NACA 2412 delivers a peak lift‑to‑drag ratio of 65.1 at α = 6°, outperforming the symmetric NACA 0012 by 20.38%. Their stall behaviors diverge fundamentally: the NACA 0012 undergoes a sudden leading‑edge breakdown, whereas the NACA 2412 shows a gradual trailing‑edge separation, thereby retaining better aerodynamic stability at high incidence.
This article analyzes the aerodynamic characteristics of the NACA2412 and NACA23012 airfoils under low angles of attack. Computational fluid dynamics (CFD) numerical simulation is used to design geometric models and perform mesh generation, while the data were analyzed using a finite element method to calculate lift...
Ji-Xiang Huang· MATEC Web of Conferences· 0 citations
In this paper, aerodynamic performance of three NACA airfoils, including NACA 2412, NACA 4412, and NACA 0012 are examined in two-dimensional CFD simulation to compare their aerodynamic performance. The current simulation is conducted at Re = 1.0 × 10
5
with turbulence model is able to predict adverse pressure gradi...
Congxiang Xue· MATEC Web of Conferences· 0 citations
This paper conducts two-dimensional numerical simulation experiments on NACA0012 and NACA2412 wing profiles, using a two-dimensional coordinate system to simulate wing profile data and generate structured grid computing domains and aircraft wing profile meshes centered around the wing profile. Computer simulation softw...
Wenhao Zhao· MATEC Web of Conferences· 0 citations
The paper discusses the behavior of two popular airfoils in the same conditions of flow, which are NACA 4412 and NACA 6412, at a Reynolds number of 1.85 ×10⁶, and uses computational fluid dynamics (CFD) as its primary instrument. The alteration in the flow field is considered also since the angle of attack is increased...
Jiawei Wang· MATEC Web of Conferences· 0 citations
Winglets are aerodynamic devices that reduce induced drag by mitigating wingtip vortices, thereby improving aircraft fuel efficiency and overall performance. This study presents a comparative computational investigation of the aerodynamic performance of wings with NACA 2412 (cambered) and NACA 0012 (symmetric) airfoils...
Irfan Nazir Wani, Manoj Kumar, P. Shukla· Discover Vehicles· 0 citations
This study examines the aerodynamic performance of airfoils using numerical simulations. It compares pressure distributions, velocity profiles, and lift and drag coefficients of two airfoils, one is symmetric and another is cambered. The cambered airfoil produces higher lift due to increased pressure gradients near th...
Muddachsir Rahman, Z. Bangalee· Dhaka University Journal of...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.