Aug 2026· Microsystems, Electronics and Acoustics· 0 citations· 14 references
Abstract
This paper addresses the critical issue of power quality degradation in modern power systems caused by the proliferation of non-linear loads. The study focuses on the development and verification of a parallel-type filter-compensating converter (FCC) specifically designed for three-phase three-wire networks, where the absence of a neutral wire complicates the mitigation of zero-sequence components and current balancing.
The authors propose a control strategy based on dividing the network period into twelve characteristic intervals, establishing precise switching sequences for energy consumption and generation modes. A comprehensive simulation model was implemented in the MATLAB/Simulink environment using the Simscape Electrical library to evaluate the converter's dynamic performance. The power circuit parameters, including input chokes and DC-link capacitance, were calculated to ensure stability and minimal voltage ripple.
Results from the simulation demonstrate that the FCC effectively transforms the highly non-linear load current (with an initial Total Harmonic Distortion of 35.13%) into a near-sinusoidal network current with a THD of 7.65%. The findings confirm that the proposed converter and its control algorithms successfully ensure electromagnetic compatibility and reactive power compensation, providing a robust solution for industrial three-wire electrical systems.
In recent years, the rapid expansion of More Electric Aircraft systems and high-voltage direct current (HVDC) transmission networks has intensified the demand for power converters that can ensure high power quality with minimal harmonic distortion. Among the well-established solutions, multipulse rectifiers have remain...
Sakineh Aghighi· Management Strategies and En...· 0 citations
Introduction. Under conditions of variable and distributed loads, the issues of internal balancing in low-voltage distribution networks cannot be resolved without the use of effective algorithms for identifying distortion sources. Furthermore, networks of this voltage class are typically built based on main feeder sche...
A. V. Petrov, R. A. Magayayev, V. E. Martusenko et al.· Вестник Северо-Кавказского ф...· 0 citations
This paper presents the design and simulation-based performance assessment of an isolated single-ended primary-inductor converter (SEPIC) for electric vehicle (EV) battery-charging applications. The proposed topology allows adjustable step-up/step-down voltage conversion with galvanic isolation to ensure excellent oper...
S. Gohil, Hardik A. Shah· International journal of ele...· 0 citations
This paper addresses the analysis, mathematical modelling and parameter justification of an active power harmonic filter designed to optimise the operation of industrial electromechanical systems equipped with high-power semiconductor converters. The relevance of the study stems from the growing proportion of non-linea...
Multilevel cascaded H-bridge (CHB) inverters are widely used in power conversion systems because they can create high-quality voltage waveforms with low harmonic distortion. However, the predictive control of multilevel converters faces challenges such as computational delays, switching dynamics, and maintaining perfor...
Asep Andang, M. Risnandar, Imam Taufiqurrahman et al.· Bulletin of Electrical Engin...· 0 citations