Skip to content
Open access

Photocurable Emulsion-Templated Organohydrogels with Elastomer-in-Hydrogel Architecture for pH-Responsive Soft Actuation

Aug 2026 · ACS Applied Polymer Materials · 0 citations · 73 references

Abstract

Soft actuators are stimuli-responsive materials capable of reversibly changing their shape/volume owing to external stimuli such as pH, temperature, and light. Hydrogels based on methacrylated chitosan (CsMa) are interesting pH-responsive biomaterials that exhibit high water uptake, pKa around 6.0, biocompatibility, and permeability to (bio)molecules. However, their poor mechanical properties often limit their application as soft actuators. In contrast, methacrylated poly(glycerol sebacate) (PGSeMa) elastomers are mechanically robust and stable across a broad range of conditions but nonresponsive to pH changes. Therefore, these hydrogels and elastomers present complementary properties that allow their integration into an elastomer-in-hydrogel architecture for the development of pH-responsive soft actuators. Herein, we present a one-step preparation of an organohydrogel via photo-cross-linking of an oil-in-water emulsion of PGSeMa-in-CsMa stabilized by the cross-linkable surfactant Pluronic F-127 dimethacrylate (F127Ma). The resulting organohydrogels display better mechanical properties, with a compressive modulus from 60 to 220 kPa, than hydrogels based on CsMa or other methacrylated biomacromolecules (<60 kPa), while maintaining a high degree of swelling (>200%) and preserving intrinsic chitosan pH responsivity. This strategy enables the use of the CsMa-based organohydrogel to access a bilayer soft actuator with suitable interfacial adhesion between the layers through one-step photo-cross-linking of the lighter PGSeMa solution over the denser organohydrogel emulsion precursor. These organohydrogels and bilayer actuators display great potential to be used as soft actuators within a physiologically relevant pH range (4.5–7.5). Therefore, this one-step preparation of organohydrogel with elastomer-in-hydrogel architecture is a versatile strategy to improve the mechanical properties of methacrylated biomacromolecule-based hydrogels without compromising their stimuli responsiveness, providing a direct protocol for the fabrication of bilayer soft actuators from renewable resources.

Read PDF

Similar papers

Aug 2026

Rapidly Thermoresponsive Poly( N -isopropylacrylamide) Hydrogels Enabled by Itaconic Acid-Modified Cellulose Fiber Cross-Linkers

Stimuli-responsive hydrogels capable of reversible volume change are promising materials for soft actuators, sensors, and biomedical systems. However, conventional poly(N-isopropylacrylamide) (PNIPAAm) hydrogels typically exhibit slow thermal responses due to limited water transport and the formation of a dense skin...

Qian-Ying Li, Akihide Sugawara, Hiroshi Uyama · 0 citations
Sep 2026

Self-Immolative Hydrogels with Orthogonal Pathways for Depolymerization by pH Change, Light, and Mechanical Force

Hydrogels are high water content networks used across many applications. Stimuli-responsive hydrogels exhibit changes in properties or break down in response to stimuli, leading to new functions and applications, with self-immolative polymer hydrogels enabling amplified responses to stimuli through end-to-end depolym...

Chuan-Feng Li, Burak Tavsanli, Elizabeth R. Gillies · 0 citations
Open access Sep 2026

Tunable mechanical properties of environmentally-sensitive hydrogels for soft robotics

Stimuli-responsive hydrogels are increasingly valued for their adaptability in soft robotic applications, both as sensors and actuators. This study investigates the tunable swelling and mechanical properties of N-isopropylacrylamide (NIPAM)-based hydrogels modified with poly(ethylene glycol)-diacrylate (PEG-DA) as a...

S. Pflumm, Dominik Fauser, Javidan Safaraliyev et al. · 0 citations
Aug 2026

Post-Polymerization Programming of Polyurethane Thermogels with Tunable Gelation and Oxidation-Responsive Disassembly Behaviors

Thermoresponsive injectable hydrogels based on amphiphilic block copolymers are widely explored as minimally invasive biomaterials, because they can be administered as sols and form gels in situ under physiological conditions. Among these systems, multiblock polyurethanes (PUs) are particularly versatile, owing to th...

Haoxiang Zeng, Ping Zeng, Yuzhu Liu et al. · 0 citations
Open access Sep 2026

Thermoresponsive, Shear-Thinning Supramolecular Hydrogels from Peptide–Polymer Conjugates for Bioinspired 3D Cell Culture

An approach for creating self-assembling, supramolecular hydrogels based on a peptide-polymer conjugate (PPC) as a three-dimensional (3D) cell culture platform is established and a method for the encapsulation and culture of human wound healing cells, fibroblasts, within the PPC hydrogels is developed.

Breanna M. Huntington, J. Dresel, Maren Schweitzer et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.