Aug 2026· Applied Sciences· 2 citations· 20 references
Abstract
Residual coal pillars retained in the overlying seam represent an important source of stress disturbance that can intensify mine pressure responses in underlying thick coal seam mining. Taking the downward mining of the Carboniferous–Permian dual-system extra-thick coal seam in the Xiao Coal Mine as the engineering context, this study integrates theoretical modeling and numerical simulation to characterize the disturbance extent of the underlying seam, the stress field redistribution in interlayer rock strata induced by the residual coal pillar, the evolution of advanced abutment pressure, and the variation in surrounding rock stress fields as the working face advances underneath the remaining coal pillar. A mechanical model is developed to describe the stress propagation and superposition induced by the coal pillar. Numerical simulation reveals that the vertical stress peak in the interlayer strata reaches 21.79 MPa near the overlying seam floor and 21.71 MPa at the underlying seam roof, and the peak stress in the coal seam roof beneath the pillar reaches 17.0 MPa, approximately 2.2 times the in situ stress, decreasing to 7.8 MPa at 42.5 m from the pillar. As the working face advances from 70 m to 10 m away from the monitoring section, the vertical stress peak on the goaf side increases from 21.19 MPa to 23.69 MPa, and on the solid coal side from 20.73 MPa to 23.46 MPa; the peak position shifts downward by approximately 0.7 m. The high floor stress from the overlying pillar superimposes strongly with the advanced abutment pressure, and the maximum disturbance width occurs at the peak abutment pressure point. Based on these findings, an optimized working face layout is proposed: an internal offset distance of 42.5 m between the mining roadway and the overlying remaining coal pillar. Following implementation of the optimized support scheme and floor grooving measures, field monitoring indicated reductions of 49.5% in roof subsidence and 60% in floor heave, with the maximum floor deformation limited to 256 mm. These results provide a theoretical basis for roadway layout and ground pressure control in downward mining of extra-thick coal seams under similar conditions.
In close-distance coal seam mining, the long-term static high-stress field induced by remnant pillars in the overlying goaf superimposes with the dynamic load disturbance from fully mechanized top-coal caving (TCC) in the underlying extra-thick seam. This superposition leads to severe strata behavior in gate roads, suc...
Wen-Chao Song, Xin-Qi Li, Xiang Liu et al.· Applied Sciences· 0 citations
Multiple mining of close coal seams alters the initial development position, growth height, and fracture morphology of overlying strata, which brings severe challenges to water inrush prevention and gas leakage control in close‐seam coal mines. Taking Working Face 10104 of a contiguous coal seam mine in Shanxi Provin...
Xiao-Yu Wu, Lei Guo, Ze-Dong Sun et al.· Energy Science & Enginee...· 0 citations
Repeated mining of shallow-buried close-distance coal seams can disturb the fractured strata remaining in the goaf of the upper coal seam. Under gully terrain, mining disturbance is coupled with surface-relief effects, which may reactivate the overburden structure and induce dynamic strata-pressure behavior. In particu...
Jie Zhang, Yi-Ming Zhang, Tao Yang et al.· Applied Sciences· 1 citation
This study investigates abnormal floor gas emissions at the 151302 driving face of Yuecheng Coal Mine. Numerical simulation and carbon–hydrogen isotope source apportionment were first used to characterize floor damage-controlled gas migration and quantify methane contributions from different coal seams. An extended thr...
Tan-Tan Yang, Hong-Wei Yang, Hai-Yang Yi et al.· Energies· 0 citations
The deformation control of roof-cut automatically formed roadways in inclined thick coal seams is strongly dependent on the reliable measurement of roof subsidence, rib convergence, stress redistribution and support-resistance demand. Taking the 1703 fully mechanized top-coal caving face of Hongling Coal Mine as an eng...
Zhi-Biao Guo, Jun-Ao Zhu, Jing-Lin You et al.· Measurement science and tech...· 0 citations
When a fully mechanized top-coal caving face passes through abandoned roadways, accidents such as shield support failure and roof collapse are likely to occur. To address this issue, this study focuses on the 3107 fully mechanized top-coal caving face at Huanglian Coal Mine of the Huangcheng Xiangfu Group in Yangchen...