In the subsequent backfilling mining method, the composite structure formed by the ore pillar and the backfill is the key element in ensuring the stability of the working face. Its mechanical behaviour directly affects mining safety and ore recovery rates. In order to elucidate the mechanical response and failure mechanisms of rock-like backfill composite structures (RLBCS) under biaxial loading, specimens with different water-to-cement (W/C) ratios (0.5, 0.6, 0.7 and 0.8) for the rock-like backfill were prepared in this study. Biaxial loading tests were conducted, with digital image correlation (DIC) technology employed simultaneously to monitor the evolution of strain and displacement on the specimen surface. The results indicate that the biaxial strength of RLBCS decreases exponentially as the W/C increases. When the W/C exceeds 0.7, the strength reaches a plateau. The strength contribution of the backfill increases relatively. The axial stress–strain curve exhibits four distinct phases. A pronounced bimodal distribution is observed when the W/C exceeds 0.5. The evolution of lateral strain exhibits a transition point where compression is followed by expansion. The threshold for lateral expansion stress exhibits a non-monotonic variation. The modulus of elasticity decreases as the W/C increases. The apparent structural strain ratio exhibits a non-monotonic variation. The failure pattern exhibits marked asymmetry. The rock-like side shows tensile failure. Where the interface is present, this manifests as localised crushing at the top of the rock-like layer, cracking along the interface, and bulging of the backfill. The W/C ratio of the rock-like material governs the failure mechanism of RLBCS. The strain localisation modes in backfill materials are classified into two types: post-peak abrupt and pre-peak gradual. The evolution of interface strain exhibits four distinct stages: an initial abrupt change, cooperative deformation, crack initiation, and post-peak instability. The spatiotemporal evolution of interfacial delamination and the deformation of the backfill was quantified through displacement field analysis. The research findings provide a theoretical basis for the design of underground mining operations.
The stability of cemented backfill during secondary extraction depends on its response to coupled static and blast-induced loading, yet the required strength and dominant failure mechanisms remain uncertain. Using the Makeng Iron Mine as a case study, we combined mix-design tests, analytical strength assessment, split...
Li-Xin Zhang, Xu Lian, Ze-Hui Deng et al.· Applied Sciences· 0 citations
In order to study the strength characteristics and failure mechanism of fissured rocks under biaxial cyclic compression, taking Zheduoshan metamorphic sandstone as the reference object, orthogonal design of sandstone like sample mix proportion was carried out based on the principle of similarity, and samples with diffe...
Tao Wu, Xiao-Qiang Xue, Chen-Pu Li· Archives of Civil Engineerin...· 0 citations
The increasing demand for deep-sea oil and gas exploration requires riser steels with superior strain hardening performance. However, the quantitative relationship between microstructural parameters (ferrite content and grain size) and the strain-hardening exponent (
n
-value) in dual-phase riser steels remains unc...
Yan-Yang Chai, Zhuo Zhao, Xiao-Meng Zheng et al.· Metallurgical Research &...· 0 citations
The paper presents the results of comprehensive laboratory research of core samples taken
from well 1 at depths of 850 and 950 m. The aim of the study was to establish a correlation between
the geomechanical features of rocks and their effect on the stress-strain state of the massif during
hydraulic fracturing. Acousti...
A. Kydrashov, Y.Zh. Sanaliyev, A. A. Murzagaliyeva et al.· Neft i gaz· 0 citations
Introduction. Although structural transformations during plastic deformation are well studied, they remain a priority area of scientific research in the field of materials science. Different approaches converge on the fact that metal deformation develops from the microscale to the macroscale level and that the change i...
Yulia Khudorozhkova, S. Burov, A. Povolotskaya et al.· Metal Working and Material S...· 0 citations
The impact behavior of calcareous sand is critical in geotechnical and protective engineering. This study investigates the response of calcareous sand under triaxial stress conditions using an improved actively confined split Hopkinson pressure bar (SHPB) apparatus. The microscopic mechanism was revealed through the...
Lin Wu, Ya-Ru Lv, Wei Wang et al.· Journal of engineering mecha...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.