Skip to content
Open access

Bearing Characteristics and Analysis Methods of Horizontally Loaded Single Piles Under Clay Slopes

Aug 2026 · Buildings · Vol 16, pp. 3073 · 0 citations · 27 references

Abstract

With the increasing construction of pile foundations on mountain slopes, the asymmetric stress field induced by slopes significantly reduces the lateral soil resistance of piles. Most existing studies focus on piles located at slope crests, and there is an obvious gap in p-y curve calculation methods for piles embedded in clay slopes. In this study, model tests of single piles in clay slopes with slope angles of 0°, 15°, and 30° are carried out. The test results reveal that the increase in slope angle aggravates the horizontal displacement and bending moment of piles and moves the pile rotation point downward. Numerical model is adopted to extract p-y curves at various embedded depths and slope angles. It is found that rising slope angles continuously degrade the initial stiffness and ultimate soil resistance of p-y curves, and such degradation weakens with increasing embedment depth. The core innovation of this paper is establishment of a modified p-y curve model considering slope effects. A simplified analytical method for slope piles is further proposed based on the load transfer method. The prediction errors of this modified model are within the allowable engineering range, which can provide a reliable analytical tool for calculating the lateral bearing capacity of pile foundations in clay slopes.

Read PDF

Similar papers

Conference Open access Oct 2026

Experimental study on bearing characteristics of rectangular pile foundations under combined loads in slope

To address the insufficient bending stiffness of pile foundations in mountainous slopes, this model test study investigates the effects of 0° and 30° slope angles, aspect ratios ranging from 1 to 3, and loading angles from 0° to 90° on the bearing characteristics of rectangular piles. Results indicate that a 30° slope...

Zhi-Sheng Shen, Shan-Li Xie, Tao Chen et al. · 0 citations
Open access Oct 2026

Nonlinear Analysis for Extended Pile Shaft Under Combined Vertical and Lateral Loads

The lateral response of partially embedded single piles, referred to as extended pile shafts, subjected to combined vertical and lateral loads is investigated using a novel analytical method that explicitly accounts for the P ‐Δ effect caused by axial pile force and the layering of foundation soils. An iterative...

Li-Xing Wang, Xiang-Zhe Xu, M. E. El Naggar et al. · 0 citations
Open access Oct 2026

Deformation and reinforcement of piled bridge foundations on weathered mudstone slopes

Introduction: With the rapid development of China’s highway system, the construction of bridges spanning valleys in mountainous regions has become inevitable. In these areas, the deformation of bridge foundations must be strictly controlled, often through slopes reinforced with anti-slide piles. Materials and m...

Jun-Xia Wang, Zhi-Li Deng, Bin Liu et al. · 0 citations
Review Open access Sep 2026

Investigation of the failure mechanism and reinforcement control effect of cut slopes under climate change

Under climate change, the increasing frequency of extreme rainfall events has made soil cut slopes more prone to progressive instability. Understanding their deformation–failure mechanisms and reinforcement effects is therefore of engineering significance. However, previous studies have mainly focused on overall stabil...

Fan-Ping Meng · 0 citations
Open access Oct 2026

Slope Stability and Reinforcement Analysis Using Front Cantol Cantilever Ground-Type Retaining Wall

Soil, as a key material in geotechnical construction, has important mechanical parameters such as cohesion (c), internal friction angle (φ), and unit weight (γ), which are significantly affected by hydrological conditions. Rainwater infiltration can increase pore pressure and reduce soil shear strength, potentially tri...

S. Debataraja, A. Irawan, Aazokhi Waruwu et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.