Freeze–Thaw Effects on Baffle Friction in Ice–Rock Avalanche Mitigation: Experiments and Numerical Simulations
Abstract
Rock–ice avalanches and repeated freeze–thaw cycles pose coupled challenges to baffle-type mitigation structures in high-altitude cold regions. This study used controlled small-scale pull-out tests to quantify changes in baffle–soil friction over 0–30 freeze–thaw cycles and then calibrated a discrete element method (DEM) model to the terminal 30-cycle condition to evaluate baffle geometry, particle size, interparticle cohesion, and pull-out velocity. Moisture redistribution approached equilibrium after approximately 7–10 cycles, whereas the friction response stabilized only after approximately 16 cycles, indicating that hydraulic stabilization preceded mechanical and interfacial stabilization. The friction coefficient decreased from 0.83 before cycling to 0.48 after 30 cycles, corresponding to an attenuation of 42.17%, and the friction force decreased from 130 to 75 N. The decay showed three stages: limited change over 0–3 cycles, accelerated degradation over 3–16 cycles, and a near-plateau thereafter. The DEM results indicate that lateral prop-root projections can increase pull-out resistance by enlarging the mobilized soil volume and enhancing mechanical interlocking; the response also depends nonlinearly on particle size and cohesion. The proposed baffle is therefore presented as a preliminary structural concept rather than a field-ready design. Because the experiments were not performed under complete geometric, kinematic, or dynamic similitude and the DEM calibration represents only one post-freeze–thaw state, the numerical values should be interpreted as laboratory-scale comparative results.