Skip to content
Open access

Hybrid CNN-GRU framework for wind turbine blade defect classification and data-driven severity assessment for predictive maintenance

Aug 2026 · Discover Applied Sciences · 0 citations

TL;DR

This study aims to use structured dimensionality reduction to preprocess and classify blade surface defects by fault cause and create a Convolutional Neural Network and Gated Recurrent Unit model to anticipate possible blade failures from drone images.

Abstract

The integrity of wind turbine blades is essential for the continuous production of renewable energy. If left unchecked, surface pollution and fissures hasten structural deterioration, lower aerodynamic efficiency, and result in catastrophic blade failure with serious safety and economic ramifications. The hybrid Convolutional Neural Network and Gated Recurrent Unit framework presented in this study was verified using a confidential industrial dataset consisting of 2,995 DJI drone-captured wind turbine blade inspection images. This study aims to use structured dimensionality reduction to preprocess and classify blade surface defects by fault cause and create a Convolutional Neural Network and Gated Recurrent Unit model to anticipate possible blade failures from drone images. MobileNetV2 was used as the spatial feature extractor. The statistical distribution of annotation bounding box regions was used to directly determine crack severity levels, substituting a data-driven method for arbitrary threshold selection. On the held-out test set, the Convolutional Neural Network and Gated Recurrent Unit achieved 95.67% accuracy, 87.13% F1-Score, and an area under the receiver operating characteristic curve of 0.9756. Removing the Gated Recurrent Unit decreases the F1-Score from 87.13% to 47.50% and the dirt-class sensitivity from 89.80% to 38.78%, according to a critical ablation investigation, offering conclusive experimental support for the Gated Recurrent Unit contribution. The superiority of the proposed model under class imbalance is demonstrated by a comparative evaluation against five baselines, including the Coordinate Attention Convolutional Neural Network, MobileNetV2-only, ResNet50, EfficientNetB0, and Yolov5s. A comprehensive Predictive Maintenance decision framework creates a deployable end-to-end solution that supports Sustainable Development Goals 7 and 9 by mapping model outputs to practical industrial maintenance responses.

Read PDF

Similar papers

Open access Sep 2026

MPA-Net: A multi-fault diagnosis algorithm for wind turbine blades based on multi-path feature fusion

Wind turbine blades, as critical components of modern wind power systems, are subjected to variable loads and harsh environmental conditions over extended periods, making them susceptible to surface contamination, leading-edge erosion, coating delamination, and other damage. Failure to detect these defects in a timely...

Jian-Wei Yang, Xin-Ye Ji, Chang Liu et al. · 0 citations
Open access Sep 2026

A Comparison of Coating-Defect Detection Models for Wind Turbine Towers

Wind energy is becoming increasingly important in meeting energy security, grid reliability, and the growing electricity demand. The rapid increase in the number and prevalence of wind turbines has triggered the need for fast, cost-effective, reliable, and easy-to-implement inspection systems. Automated detection of co...

Ü. Işıkdağ, Yaren Aydın, S. Niğdeli et al. · 0 citations
Sep 2026

Wind turbine blade icing diagnosis using Gram Matrix representation and a multi-branch ConvNeXt network

Wind turbine blade icing frequently occurs under harsh operating conditions, such as low temperatures, high altitudes, and high humidity, causing aerodynamic degradation, reduced power generation efficiency, and even serious safety risks. However, accurate identification of blade icing states under varying conditions r...

Zi-Yu Li, Yi-Ping Yuan, Ling-Chao Meng et al. · 0 citations
Conference Sep 2026

Semisupervised fault detection for wind turbines based on explainable artificial intelligence and transformer autoencoder

Deep learning-based fault diagnosis for wind turbine blades has been widely adopted owing to its end-to-end feature extraction capability, yet it continues to face considerable challenges. First, wind turbines predominantly operate under normal conditions, resulting in an acute scarcity of labeled fault data. Second, t...

Chen Zhang, R. Kong, Fan-Qi Deng et al. · 0 citations
#edge computing Open access Oct 2026

Resource-Adaptive Neuro-Fuzzy Edge System for Wind Turbine Blade Defect Diagnosis

Reliable UAV-based inspection of wind turbine blades requires diagnostic models that maintain acceptable decision quality under image degradation and limited edge-computing resources. This study proposes a resource-adaptive neuro-fuzzy edge system for wind turbine blade defect diagnosis. SqueezeNet transforms input ima...

Lesia Dubchak, Bohdan Rusyn, V. Samotyy et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.