Sustainable construction increasingly depends on practices that enable not only efficient construction but also the deconstruction and reuse of structural components. However, the construction sector, characterized by its vast scale and inherent occupational risks, lacks mature solutions for the automation of such deconstruction processes. This technological gap has driven the development of a robotic system designed as a proof of concept for the autonomous disassembly of bolts, alongside its corresponding Digital Twin, which is essential for simulation, accessibility verification and remote monitoring. This article describes the system's architecture, demonstrates its functional feasibility and identifies requirements for improvements in active control and hardware, which will be addressed in subsequent optimization stages, converging toward a robust solution applicable in industrial environments.
This paper presents the development of a co-designed timber assembly system with a mobile robotic platform for collective robotic construction (CRC) across three successive demonstrations. Iterative advances in the relationship between material, mechanical robot design, architectural design, and robotic control enable...
S. Leder, Hyungyu Kim, M. Sitti et al.· Construction Robotics· 0 citations
Traditional civil engineering construction is restricted by low efficiency, limited moulding capacity, and potential safety hazards. This paper systematically reviews the key technologies, application boundaries, and core bottlenecks of 3D printing robots in civil engineering. It sorts out the evolution process from co...
Bao-Wen Guo· MATEC Web of Conferences· 0 citations
Addressing the issues of low production efficiency and difficulty in defect control in the segmented production of PA6 in-mold injection molded connectors, this paper designs an automated workstation that integrates cutting and feeding, robotic transfer, injection molding, and pressure-resistant sorting. Taking bimetal...
Zhe-Lu Wang, Zhi-Long Hu, Tuo Ren et al.· International Journal of Adv...· 0 citations
The automation of construction processes by means of robotics is constrained by the fact that conventional gantry systems and anthropomorphic manipulators have either a limited workspace or a complex and low-mobility structure. A promising alternative is cable-driven parallel robots (CDPR), in which a moving platform,...
A. Obrubov, O. Ushkarenko, O. Diakonov et al.· Інфокомунікаційні та комп'ют...· 0 citations
This study proposes a unit-assembly architecture for robot modules that enables tool-less disassembly and automated assembly as a design pathway for recyclable robots. The robot module is decomposed into nine separable functional units (drivetrain, cooling, and control groups) connected exclusively via three types of r...
Xing-Yan Cheng, Shuang-Yu Wang, Junichiro Shiomi et al.· Journal of Robotics and Mech...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.