Aug 2026· Latvian Journal of Physics and Technical Sciences· Vol 63, pp. 26 - 47· 0 citations· 36 references
Abstract
Abstract The manuscript presents the results of the computational investigation into the aerodynamic characteristics of a Vertical Take-Off and Landing (VTOL) flying wing unmanned aerial vehicle (UAV), with particular emphasis on the aerodynamic behaviour of the lifting surface. The airflow around the model is analysed over a wide range of velocities corresponding to Reynolds numbers Re≈9.66×10⁴ – 1.29×10⁶. Special attention is devoted to the influence of the angle of attack (AOA), airflow regimes, and wing geometric parameters on the aerodynamic efficiency and stability of the aircraft. The following tasks have been achieved in this study: the development of the geometric and computational wing model; generation of the computational domain and mesh with verification of the grid convergence; computational modelling of the flow at different velocities and AOA; determination of aerodynamic coefficients; construction of the aerodynamic polar; evaluation of aerodynamic and energy efficiency; and analysis of stability and transition regimes, including the influence of ground effect. The study is based on the numerical solution of the unsteady Reynolds-averaged Navier-Stokes equations using the Low Reynolds k-ε turbulence model. The finite volume method has been applied for discretization. The simulations have been carried out in the SolidWorks/FlowEFD software environment using adaptive computational mesh and variable time step. The reliability of the results has been confirmed through the grid independence analysis. It has been found that within the AOA range α = -4° – 14°, the lift coefficient dependence CL(α) remains linear, while the drag coefficient CD(α) follows the quadratic trend. The maximum aerodynamic efficiency reaches K≈11 at AOA of α≈6°, corresponding to the optimal cruise flight regime. It has also been shown that the influence of the Reynolds number on the aerodynamic characteristics within the investigated range is insignificant. The static longitudinal stability of the aircraft has been confirmed by the negative slope of the pitching moment dependence. The characteristics of the VTOL transition regime have been determined, and a significant influence of the ground effect has been identified, leading to the increase in lift and the reduction in induced drag at low flight altitudes. The results of the study confirm the high aerodynamic efficiency of the flying wing configuration for VTOL UAVs. The optimal flight parameters and transition conditions providing maximum aerodynamic and energy efficiency have been determined. The obtained dependencies and identified patterns can be applied during the design, optimisation, and development of the control systems for UAVs of this type. The obtained results can be used not only for analysis purposes, but also as an engineering tool for the development of aerodynamically efficient UAV configurations at the early design stage, making it possible to reduce the need for experimental testing and shorten the flying vehicle development cycle.
This paper presents the development and validation of a comprehensive mathematical model for a Miniclass unmanned aerial vehicle (UAV), optimized for highfidelity flight dynamics simulation and the design of intelligent control systems. The model provides a rigorous analytical description of aerodynamic forces and mome...
O. Volkov, M. Komar, Ihor Popov et al.· Automation, Control, and Inf...· 0 citations
The aerodynamic characteristics of the wing models of an unmanned aerial vehicle (UAV) are being studied. The aim of the work is to identify the dependence of the aerodynamic characteristics of an aircraft-type UAV wing model on its shape and angle of attack and to select the wing shape with the best aerodynamic qualit...
В. А. Антоневич, Г. Б. Антоневич, A. D. Pripadchev et al.· LETI Transactions on Electri...· 1 citation
To ensure the structural reliability of the external radome mounted above the helicopter main rotor, high-fidelity Computational Fluid Dynamics (CFD) simulations were conducted to investigate the complex aerodynamic loads encountered during actual flight. Addressing the structural design requirements, this study employ...
Xi-Wei Zhou, Lian-Wang Fei· Journal of Physics, Conferen...· 0 citations
It is noted that in agriculture, fixed-wing unmanned aircraft systems successfully perform the tasks of crop monitoring, pest and disease detection across large areas remote from the operator. Further improvements in unmanned aircraft speed, flight range, and payload capacity can be achieved by reducing aerodynamic dra...
P. A. Averichkin, D. Gritsay, P. I. Chumak· Agricultural Machinery and T...· 0 citations
With the rise in demand for fuel-efficient aircraft, many people have been exploring how to reduce aerodynamic drag to lower fuel consumption and emissions. The three main parts that affect the aerodynamics and fuel economy of the aircraft are flaps, winglets and engine settings. Aerodynamic mechanisms and Design Trade...
Kai-Chen Shen· Applied and Computational En...· 0 citations
This article analyzes the aerodynamic characteristics of the NACA2412 and NACA23012 airfoils under low angles of attack. Computational fluid dynamics (CFD) numerical simulation is used to design geometric models and perform mesh generation, while the data were analyzed using a finite element method to calculate lift...
Ji-Xiang Huang· MATEC Web of Conferences· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.