Multi-Hop RIS ISAC for Target Positioning: A Tensor Decomposition-Based Approach

Abstract

Reconfigurable intelligent surface (RIS) has demonstrated remarkable potential to enhance the performance of integrated sensing and communication (ISAC), particularly when the line-of-sight (LoS) paths are obstructed. By controlling the reconfigurable elements on the surface, RIS can establish virtual LoS paths and provide considerable passive beamforming gains, thereby significantly improving the received signal quality. In this paper, we design a novel multi-hop RIS ISAC system for target positioning, where multiple RISs are deployed to assist the communication from a transmitter to associated users while simultaneously enhancing receiver sensing performance in target positioning. Specifically, we formulate an optimization problem to minimize the root mean square error (RMSE) of the target detection while guaranteeing the communication requirements of the users. To solve this problem, we first unfold the cascaded sensing channel through parallel factor decomposition, and develop a low-rank CANDECOMP/PARAFAC decomposition (CPD)-based scheme to extract the location parameters (i.e., angle of arrival, angle of departure and delay) of the sensing targets. Then, we develop a scheme for jointly selecting the transmit beamforming and RIS phase shift configurations to maximize the sensing energy at the receiver, which in turn leads to improved accuracy in target positioning. We also provide a uniqueness analysis, complexity analysis, and Cramér-Rao lower bound (CRLB) of the parameters estimated by our methodology. Simulation results validate the improvement in target positioning obtained by our design relative to baselines.