Reliable prediction of crystallographic texture in laser powder bed fusion is critical for linking process conditions with anisotropic response and for qualification. However, black-box models may fail under shift and cannot distinguish weak data support from loss of physical validity. This study develops a two-stage physics-based model for<001>|| BD (build direction) texture in Inconel 718. Stage 1 maps process variables to melting mode and melt pool geometry. Stage 2 predicts texture by combining an empirical physics model with a random-forest residual model. A k-nearest-neighbor weight attenuates residual corrections for poorly supported queries, while a study-specific areal beam-power-density criterion withholds predictions outside the adopted conduction envelope. Conformal intervals are evaluated on the retained physics-valid set, and SHAP and Sobol analyses assess residual sensitivity. Under a controlled leave-one-defocus-out evaluation, the physics anchor achieved R^2 = 0.778, against -0.001 for the black-box model and 0.750 for the gated hybrid. Under leave-one-group-out cross-validation, the gated hybrid reached R^2 = 0.592 against 0.538 for the black-box model. Retained-set coverage was 92.9% at a mean full width of 3.65 multiples of a uniform distribution (MUD) under grouped cross-validation and 100% at a width of 3.21 MUD under transfer to a withheld +80 mm defocus regime. An illustrative mapping produced a retained BD elastic-modulus span of 127-187 GPa. On nine conditions from a separately built sample set, the framework withheld three, attenuated three, and matched the measured ordering for the rest. Separating data applicability, physics validity, and predictive uncertainty into distinct decisions lets the framework transfer where an unconstrained model does not, and withhold predictions where no model class performs adequately.
Powder bed fusion–laser beam (PBF-LB) of nickel–titanium (NiTi) has attracted increasing interest in aerospace, biomedical, and energy applications owing to its shape memory and superelastic properties, combined with the capability to fabricate complex geometries. However, the strong sensitivity of NiTi to thermal hist...
Sampreet Rangaswamy, M. Doğu, Camille Rubio et al.· Materials· 0 citations
High-entropy alloys (HEAs) provide a broad compositional space for developing structural materials with balanced phase stability and mechanical performance. However, reliable mechanical-property prediction remains challenging because alloy chemistry, phase constitution, processing state, and model uncertainty are s...
High-energy X-ray diffraction microscopy (HEDM) has emerged as a critical technique for studying the microstructure and, increasingly, strain fields in solids. However, current algorithmic or experimental methods to obtain intragranular fields are time-intensive, provide limited spatial resolution, or yield stress and...
C. Cocke, Eitan E. Camacho, Sara F. Gorske et al.· 0 citations
Ultrafast-laser chamfering of amorphous glass substrates is limited by subsurface lateral cracking. Guided by a cause-and-effect (Ishikawa) screening that identified the laser incidence angle as the dominant controllable lever, we formulate a physics-based, semi-empirical Damage Index Ψ = k0 ⋅ M ⋅ Φ ⋅ P, coupling geome...
Song-Jhe Liu, Yi-Wun Wang· Journal of Applied Physics· 0 citations
High-power laser beam welding (LBW) is a widely used joining technique for metallic materials. However, porosity defects frequently arise during the process, leading to significant degradation of weld properties. Accurate prediction of porosity remains challenging due to the highly nonlinear and material-dependent unde...
Xiang-Meng Meng, M. Bachmann, Fan Yang et al.· Journal of laser application...· 0 citations
Composition-based machine learning for Al-Mg-Si alloys lacks generalization. A physics-informed strategy incorporating physicochemical descriptors was proposed, improving the coefficient of determination (R2) by 30% over composition-only models. Shapley additive explanations (SHAP) identified electronegativity differen...
Jun Li, Chen Su, Chen-Lu Yu et al.· Materials Research Letters· 1 citation
Related blog posts
Microsoft Research Blog· microsoft.comNov 16, 2026
AI coding agents are increasingly help developers fix bugs and build features largely on their own, but every interaction with their models consumes tokens. In each session, an agent sends instructions, tool descriptions, and session history to its model. Most efforts to reduce this cost focus on individual tasks. Yet developers return to the same […] The post TokenEconomizer: Learning from Experience to Make AI Coding Agents More Efficient appeared first on Microsoft Research.
MIT News · Artificial Intelligence· news.mit.eduNov 13, 2026