Hydraulic short-circuit (HSC) operation is an important approach to enhancing the operational flexibility of pumped-storage power plants (PSPPs). However, under this new operating mode, the flow characteristics in the bifurcated pipe deteriorate significantly, posing a threat to the efficiency of the piping system and potentially affecting the inflow conditions for the turbine. In this study, six improved bifurcated pipe models were designed, and their internal flows under pumping, generating, and HSC modes were numerically simulated. Entropy production theory and vortex identification method were employed for flow field analysis. The results show that local modifications confined to the bifurcation are insufficient to simultaneously improve energy characteristics across different modes. In contrast, the bypass pipe enables early flow diversion, weakening the original high-dissipation regions while introducing controllable additional losses. M6 achieves an average energy loss reduction of 47.85% in the mid-to-high flow split ratio range (FSR > 0.3). A strong correlation is observed between vortex suppression and energy loss reduction: the bypass pipe substantially shortens the main vortex length at the inlet section of the generating branch, while simultaneously inducing new shear vortices at the junction; adjustment of its installation position is expected to further shorten their extension, thereby ensuring the normal operation of the turbine. This study provides a new technical pathway for extending the operating range of HSC operation and contributes to enhancing the grid-regulation capability of PSPPs.
Shan Zhu, M. Xia, Shizhe Liu et al.· Machines· 0 citations
The grid volatility caused by the integration of wind and solar power poses challenges to power systems, where Pumped Storage Hydropower (PSH) plays an irreplaceable role. During start-up, shutdown, and mode transition of pump turbines, near-zero flow conditions frequently occur, leading to severe hydraulic instability, guide vane vibration, and abnormal noise. This review synthesizes field observations from multiple high-head pumped storage stations together with recent experimental, numerical, and theoretical studies. The review indicates that hydraulic instability is primarily associated with the coupled effects of clearance leakage flow, bi-stable flow, and Rotor–Stator Interaction (RSI). The review suggests that self-excited vibration, rather than forced resonance, dominates guide vane vibration and abnormal noise under near-zero flow conditions. Four mainstream regulation strategies are summarized, including Misaligned Guide Vanes (MGVs), start-up/shutdown sequence optimization, structural-parameter adjustment, and operating range avoidance. The applicability and limitations of each strategy are discussed. These findings provide support for the design and operation of high-head, large-capacity pump turbines.
Hui Zeng, Yuhao Yan, Bin Wang et al.· Machines· 0 citations
During load rejection in pumped-storage power stations, the rotational speed of the pump-turbine increases abruptly. The consequent structural deterioration of the internal flow induces high-amplitude hydraulic excitations, posing a serious threat to the operational stability of the unit. This study investigates a Francis pump-turbine to elucidate its flow evolution and instability mechanisms during load rejection. The fluid is modeled as weakly compressible water to capture finite pressure wave propagation. Dynamic mesh simulates guide vane closure, while vortex identification and short-time Fourier transform analyze transient pressure pulsations. The results indicate that the transient process can be sequentially divided into four typical stages—turbine mode, turbine-braking mode, reverse-pump mode, and return-to-turbine mode—to account for the most critical periods during the load rejection transient. The unit exhibits the poorest stability near the maximum rotational speed (443.34 r/min), where flow reversal and the full development of vortex structures significantly amplify fluctuations in hydraulic thrust. The vaneless space is identified as the primary source of pressure pulsations, whose characteristics are dominated by rotor–stator interaction mechanisms, and such disturbances decay rapidly in the downstream direction. Under turbine-braking and reverse-pump conditions, vortex rings, backflow, and asymmetric vortex structures generated within the spiral casing collectively contribute to the severe deterioration of the internal flow field quality.
Lei Deng, Wenfu Han, Yuhao Yan et al.· Water· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.
